ConcreteMix
2Pages

CTS Cement | Professional Cement Products Rapid Set® Concrete Mix Datasheet CONCRETE MIX VERY RAPID HARDENING CONCRETE High Strength & Superior Durability Highlights: • Fast Sets in 20 minutes; ready for traffic in 1 hour product Name: Rapid Set® Concrete Mix Very Rapid Hardening Concrete • Structural For repair and new construction DESCRIPTION: Concrete Mix is a high-performance, fast-setting, multipurpose concrete repair material. Durable in wet environments, Concrete Mix is a blend of Rapid Set® hydraulic cement and quality aggregates. Concrete Mix is non-metallic and no chlorides are added. Mix Concrete Mix with water to produce a workable, quality concrete material that is ideal where fast strength gain, high durability and low shrinkage are desired. Concrete Mix sets in 20 minutes and is ready for traffic in 1 hour. • Multi-purpose Use for concrete repair, formed work, setting posts, footings, floors, machine bases, and more Applications: Use Concrete Mix for general and structure concrete repair, construction of pavements, formed work, footings, setting posts, industrial floors and machine bases. For freeze thaw durability, in some geographical areas, Concrete Mix contains an air-entraining admixture. • Durable Formulated for long life in critical applications Manufacturer: CTS Cement Manufacturing Corp. 11065 Knott Ave. Cypress, CA 90630 Tel: 800-929-3030 Fax: 714-379-8270 Web: www.ctscement.com E-mail: info@ctscement.com Environmental Advantages: Use Concrete Mix to reduce your carbon footprint and lower your environmental impact. Production of Rapid Set cement emits far less CO2 than portland cement. Contact your representative for LEED values and environmental information. RECOMMENDED USE: Apply Concrete Mix in thicknesses from 2" to 24" (5 to 61 cm). For thinner sections, use Rapid Set® Cement All® or Rapid Set® Mortar Mix. Not intended for high heat applications above 300°F. For bonding applications, a minimum one test section should be prepared to evaluate the suitability of the materials and procedures. Surface Preparation: For repairs, application surface shall be clean, sound and free from any materials that may inhibit bond, such as oil, asphalt, curing compound, acid, dirt and loose debris. Mechanically abrade surface and remove all unsound material. Apply Concrete Mix to a thoroughly saturated surface with no standing water.

CONCRETE MIX VERY RAPID HARDENING CONCRETE High Strength & Superior Durability Mixing: The use of a power-driven mechanical mixer, such as a mortar mixer or a drill-mounted mixer, is recommended. Organize work so that all personnel and equipment are in place before mixing. Use clean potable water. Rapid Set® Concrete Mix may be mixed using 3.5 to 4.5 quarts (3.3 to 4.2 L) of water per 60-lb (27-kg) bag. Use less water to achieve higher strengths. Do not exceed 4.5 quarts (4.2 L) of water per bag. For increased fluidity and workability use Rapid Set® Flow Control® plasticizing admixture from...