EcoAir 510M EcoAir 520M
2Pages

Data Specification EcoAir 510M & 520M Air / Water Heat Pump Variable Speed inverter driven air source heat pump with an output range of 2 to 10 kW for the 510M and 4.9 – 22 kW for the 520M The CTC EcoAir 510M and 520M are variable speed inverter driven air source heat pumps that adapt automatically to the building's output requirements. Output is increased as required by increasing the speed of the inverter driven compressor and as less output is required the speed of the compressor is reduced. The design is based on the tried and tested EcoAir 400 range with same high-quality finish, excellent design and attention to detail. The focus of development was to retain the popular properties that characterise the EcoAir family whilst taking full advantage of the inverter driven variable speed compressor. The result is a product that adapts to the heating demand and that has very high COP values and low sound levels. CTC EcoAir 510M and 520M have been optimised to make the best possible use of the environmentally The CTC EcoAir 510M and 520M must always be friendly energy in the air. It converts the energy in the air installed with either a CTC EcoZenith i250, i350 or i550 into heat and hot water without the need for any thermal store with built in controller or with the CTC boreholes or coils in the ground. The CTC EcoAir 510M EcoLogic Family/Pro controller. All CTC controllers have and 520M both have on-demand automatic defrost that a 4.3 inch colour touch screen with text and symbols provides more heat, more output and a longer service providing a clear and simple to use interface. This makes life. The CTC EcoAir 510M and 520M are of course fitted it simple to adjust the heating temperature and hot water with a heated condensation water tray. demand as well as retrieve operation information. Key features • Savings of up to 80% • Energy class A++ (in package with built-in control) • Most output when required • Optimal seasonal coefficient of performance up to 4.5 (SCOP) • Simple and cost-efficient installation • Inverter-controlled compressor and electronic expansion valve • Built-in condensation water tray with on demand heater • Provides heating down to -22°C and produces water up to 65°C • Using CTC Connect with the CTC Controller the EcoAir 510M can be controll

EcoAir 510M & 520M TECHNICAL DATA Electrical Data IP class ErP data for heat pump Energy class heating 35/55 °C (in package control with EZ i350) Energy class heating 35/55 °C (without control) Max. specified output compressor (100 rps) Nominal heat output (Pdesign) 35/55 °C2) Operational data for heat pump COP2) SCOP average climate 35°C/55°C (EN14825) SCOP cold climate 35°C/55°C (EN 14825) Heat pump dimensions Water volume Refrigeration quantity type/quantity High pressure switch rating Max. operating pressure water Width x Height x Depth Compressor type Twin rotary Inverter scroll Noise...