Catalog excerpts
07 95 00 2012 C/S Expansion Joints @ Norman Y. Mineta San Jose International Airport
Open the catalog to page 1Marina Bay Sands Architect: Moshe Safdie Architects SSR Series Floor Cover APF Series Floor Covers The introduction of a corrugated extruded aluminum center plate provided weight reduction, superior strength and mechanical fastening of the side pans (no welding). The introduction of low friction bearings removed any metal-tometal contact and allowed for friction free operation. Finally, a gravity based turnbar assembly removes the need for a spring. Based on a European design used successfully for 20 years, this robust all-aluminum cover presents a remarkable flush finish offering zero...
Open the catalog to page 2CATHEDRAL OF CHRIST THE LIGHT Having the best products is only the start, how we apply them is the key! The award winning Cathedral of Christ the Light project in Oakland, California by Skidmore Owings Merrill was designed as an abstract modern form that functions as both a church and civic structure. Design Architect: SOM Architect of Record: Kendall/Heaton Associates The Oakland Diocese’s initial project prospectus called for light as the central focus of the design, and they asked the design team to create a timeless structure capable of enduring for three centuries. SOM’s design for the...
Open the catalog to page 3The Art of Concealment Large seismic joints are a necessary evil in today’s architecture and can destroy even the finest facade design. C/S has become a master at the art of concealment, developing a range of covers that truly empathize with an architect’s design intent. Exterior Joint Covers @ Norman Y. Mineta San Jose International Airport Gensler did not want its design for the San Jose Airport to be interrupted by obtrusive expansion joint covers inside or out. For the exterior, Gensler called on C/S to incorporate 25" XLS covers within the 34" wide CENTRIA metal panels, making them...
Open the catalog to page 4Selection Chart Floor Covers The size of joint and movement dynamics dictate whetheryou require a standard or seismic expansion joint cover system. Before making a selection, there are other decisions you must make. The selection of the floor cover is often the most critical step in the specification process since the performance of the floor cover has the greatest impact on the occupants of the building. The presence of rolling loads and the need for hygiene are major considerations in cover selection, while aesthetics in seismic covers is also a significant issue. Wall & Ceiling Covers...
Open the catalog to page 5For comprehensive information on these products, visit www.c-sgroup.com/expansion-joint-covers Floor Covers All covers can include a fire barrier (see pages 8 & 9) Flush Thinline Floor Covers 1"-2" Use this cover for: • pplications with small, interior joints where A minimal visual impact is preferred. ES ES 1"-3" ES 1"-3" • eets ADA standards. M • Where wheeled equipment is to be used. • Where hygiene is important. JW GFT-100 GFT-200 GFST-200 ES ES GFPS-100 JW JW GFPS-200 ES JW GFS-200 Floor to Wall Covers JW New heavy-duty design now standard. ES ES JW How it works: C/S unobtrusive,...
Open the catalog to page 6For comprehensive information on these products, visit www.c-sgroup.com/expansion-joint-covers Floor Covers Use this cover for: Flush Twinline Floor Covers 2"-4" • pplications with larger thermal movement requirements A and where a flush, concealed cover is preferred. ES ES 5/8" 5/8" • pplications using carpet or vinyl floor covering up A to 1/8" deep. • 3/8" recessed center plate available. • here wheeled equipment is expected. W JW GTR JW GTP • Where hygiene is important. ES ES 5/8" 1-3/16" JW GTP-HD JW DGTR Heavy Duty 2000lb. Point Load Floor to Wall Covers ES ES ES 5/8" 5/8" 5/8" How it...
Open the catalog to page 7For comprehensive information on these products, visit www.c-sgroup.com/expansion-joint-covers Cycling Use this cover for: Flush Seismic Floor Covers 5"-Up Plate Deflectors Ensure System Remains Operable through Major Seismic Activity • Seismic interior applications requiring a completely flush joint cover virtually concealed in the surrounding floor finishes. Gaskets Disengage to Allow Full Seismic Movement • Applications using carpet or vinyl floor covering up to 1/8" deep. • Where wheeled equipment is expected. • Where hygiene is important. SGR Contracted SGR Expanded Floor Covers ES ES...
Open the catalog to page 8For comprehensive information on these products, visit www.c-sgroup.com/expansion-joint-covers PAN Seismic Floor Covers 4"-Up Cycling Use this cover for: Center Pan Lifts Clear Of Moving Structure But Remains Centered Over Opening • nterior and exterior seismic applications where cover I Unique Gravity Activated Turnbar System Returns Cover To Normal Position After Event concealment is desired in deeper floor finishes. • pplications with floor finishes of up to 1-1/2" thick. A • eavy duty versions available for limited vehicular access. H • orrugated extruded center plate (eliminates...
Open the catalog to page 9For comprehensive information on these products, visit www.c-sgroup.com/expansion-joint-covers Floor Covers Standard Allway Metal Floor Covers 1"-4" Use this cover for: ES ES • se APF Series for applications with heavy rolling loads. U 1" • Interior applications where low maintenance is desirable or for tamperproof applications. JW JW • Suitable for most floor finishes – frame configuration variable to suit selected finish. APF AL-HD Specify Heavy Duty Model AL-HD For 2000 lb. Rolling Loads Designed for carpet ES ES 1" 1" JW JW FYW ALR ES ES 1" JW JW ALS PC Floor to Wall Covers How it...
Open the catalog to page 10For comprehensive information on these products, visit www.c-sgroup.com/expansion-joint-covers Floor Covers Seismic Allway Metal Floor Covers 4"-Up Use this cover for: ES ES 1-1/8" 1-3/8" • Interior or exterior seismic applications. • Limited vehicular access (heavy-duty models). JW JW SJHD* SJPF* Heavy Duty 2,000 lb. Point Load Bronze or Stainless Center Plate ES ES 1-1/8" 1-1/2" JW JW SJPFB/SS* SJP* Floor to Wall Covers ES ES How it works: C/S Seismic Metal Floor Covers can provide 30" plus of movement during a seismic event. The cover’s self-centering aluminum center plate remains flush...
Open the catalog to page 11All CS - Construction Specialties catalogs and technical brochures
-
G6PC
2 Pages
-
Acrovyn by Design
13 Pages
-
Pedigrid® G1
2 Pages
-
Peditred SA G7 Product_Data
2 Pages
-
Pedimat M1 Product Data
2 Pages
-
Explovent
4 Pages
-
Acrovyn
39 Pages
-
Wall Panel
16 Pages
-
cubicle curtain
13 Pages
-
Phoebe Putney Case Study
1 Pages
-
Children's Mercy Case Study
1 Pages
-
Lakeside Hospital Case Study
1 Pages
-
Goes Not Matches Flyer
2 Pages
-
Acrovyn 4000 Flyer
4 Pages
-
Quick Lock Flyer
1 Pages
-
Behavioral Health Flyer
4 Pages
-
Acrovyn Doors 2014
17 Pages
-
Acrovyn by Design
7 Pages
-
Acrovyn Profiles 2013
37 Pages
-
Solarmotion
17 Pages
-
Saratoga™ Wall System
6 Pages
-
Acrovyn Profiles 2012
41 Pages
-
Sun Control Catalog
13 Pages
-
C/S Louvers Catalog
17 Pages
-
C/S Pedisystems
13 Pages
-
C/S Grille Catalog
9 Pages
-
New Floorometry Brochure
13 Pages
-
Parking Garage
7 Pages
-
Acrovyn Doors 2012
13 Pages
Archived catalogs
-
Cubicle Curtains
20 Pages
-
General Cubicle
11 Pages
-
APC Fire and Smoke Vents
5 Pages
-
Explovent Catalog
3 Pages
-
SolarmotionTM Brochure
7 Pages
-
Wall and Door Protection
45 Pages
-
CS_Environment
16 Pages