Crestron CEN-UPS1250 Uninterruptible Power Supply Operations & Installation Guide

This document was prepared and written by the Technical Documentation department at: Regulatory Compliance This unit has been manufactured to comply with the following Standards for Safety in the United States, Canada and Mexico. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not...

Uninterruptible Power Supply Safety Information Read this manual Read all of the safety and operating instructions before installing and operating this device. Keep this manual Retain this manual and all of the safety information that came with this device. Warnings Comply with all warnings presented in this manual, as well as any warnings found on the device. Follow instructions Follow all instructions that pertain to operating and using this device. Cleaning Shut off and unplug this device from the wall outlet and disconnect the battery before cleaning. Use a soft damp cloth for cleaning. Do...

Uninterruptible Power Supply Other Grounding This device provides a grounding lug on the rear panel for grounding the device to an external transient voltage surge suppression (TVSS) device. Ensure these ground connections are made in accordance with the instructions provided with the TVSS device. Lightning This device employs metal oxide varisters (MOVs) and other circuitry to protect against lightning and other sources of sudden voltage surges and sags. It is not necessary to turn this device or the devices connected to this device off during a lightning storm. Power Lines Do not locate outside...

Uninterruptible Power Supply Uninterruptible Power Supply: CEN-UPS1250 Operations & Installation Guide – DOC. 6635E

Uninterruptible Power Supply Uninterruptible Power Supply: CEN-UPS1250 Introduction The CEN-UPS1250 is a 1250 Watt, 120 Volt uninterruptible power supply and power conditioner Engineered by APC® specifically for Crestron. Designed to protect Crestron® control systems, media servers, video displays and other devices, the CEN-UPS1250 employs pure sine wave battery backup to maintain continuous operation of critical components whenever power is disrupted. Remote monitoring and control through award-winning Crestron RoomView® software and full Crestron control system integration deliver a comprehensive...

Uninterruptible Power Supply When running on battery backup, the CEN-UPS1250 can power a rack full of equipment for several minutes without interruption. In the event of a prolonged power outage, a properly managed shutdown of the equipment can be performed automatically. Configurable “load-shedding” allows only certain components to be shut down, preserving battery fuel and extending runtime for more vital components. The CEN-UPS1250 also ensures a smooth changeover from primary power to a backup generator. Managed Power Control The CEN-UPS1250 provides 12 120 Volt power outlets organized in...

Crestron CEN-UPS1250 Uninterruptible Power Supply RoomView and Control System Integration Monitoring and operation of the CEN-UPS1250 extends beyond its front panel, providing direct communication with Crestron RoomView Remote Asset Management Software as well as with Ethernet enabled Crestron control systems. The CEN-UPS1250 notifies RoomView® whenever it switches to battery backup and warns if the battery is low or overloaded. It also reports which outlet banks are on, as well as the line voltage, output voltage, frequency, voltage regulation status, system load, internal temperature, ambient...

Uninterruptible Power Supply Crestron CEN-UPS1250 1. The latest software versions can be obtained from the Crestron Web site. Refer to the NOTE following these footnotes. 2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product Catalog for a complete list of 2-Series control systems. NOTE: Crestron software and any files on the Web site are for authorized Crestron dealers and Crestron Authorized Independent Programmers (CAIPs) only. New users must register to obtain access to certain areas of the site (including the FTP site). 4 • Uninterruptible Power...

Uninterruptible Power Supply Physical Description This section provides information on the connections, controls and indicators available on the CEN-UPS1250. CEN-UPS1250 Front View Operations & Installation Guide – DOC. 6635E Uninterruptible Power Supply: CEN-UPS1250 •

Uninterruptible Power Supply CEN-UPS1250 Overall Dimensions (Front and Top Views) 6 • Uninterruptible Power Supply: CEN-UPS1250 Operations & Installation Guide – DOC. 6635

Crestron CEN-UPS1250 Uninterruptible Power Supply Connectors, Controls & Indicators (Continued on following page) Operations & Installation Guide - DOC. 6635E Uninterruptible Power Supply: CEN-UPS1250 • 7

Uninterruptible Power Supply Crestron CEN-UPS1250 Connectors, Controls & Indicators (Continued) (Continued on following page) 8 • Uninterruptible Power Supply: CEN-UPS1250 Operations & Installation Guide - DOC. 6635E

Crestron CEN-UPS1250 Uninterruptible Power Supply Connectors, Controls & Indicators (Continued) Crestron CEN-UPS1250 Uninterruptible Power Supply Green LED □r RESET Button INPUT 120V 47-63 Hz 12A (MAIN POWER INPUT) IN - (1) 4-pin RJ-11 female; Dual line telephone connection OUT - (2) 4-pin RJ-11 female; Protected dual line telephone/modem device connection (1) USB Type B female; USB computer console port (cable included) (1) 8-pin RJ-45 with two LED indicators; 10/100BASE-T Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity (1) Red miniature push button, resets...