Catalogs >
CRESTRON >
CEN-CI3-1

CEN-CI3-1
3Pages

Catalog excerpts

CEN-CI3-1 3-Series® Card Interface - 1 Slot >> Accepts one 3-Series® Control Card >> Provides control port expansion for any 3-Series Control System® >> Powerable via PoE or an external power pack [2] >> Single-space, half-width 19-inch rack-mountable [1] >> Under-table mountable [1] The Crestron® CEN-CI3-1 is a compact device designed to provide a versatile control interface and expansion solution using any single 3-Series® Control Card. It is used to expand the control ports of a 3-Series Control System®, and can be installed with the control system at the central equipment cabinet or located remotely near the device(s) under control. It can be rack-mounted, placed on a shelf, or attached under a table.[1] It interfaces with the control system via Ethernet and can be powered via PoE or a dedicated 24V power pack.[2] The CEN-CI3-1 accepts one 3-Series control card (sold separately). Control cards are available to support bidirectional RS-232, 422, or 485; IR or 1-way serial; 0-10V analog inputs; digital logic inputs or outputs; and low-voltage relay outputs.[3] SPECIFICATIONS Communications Controls & Indicators PWR: (1) Green LED, indicates operating power supplied from power pack or PoE SLOT: (1) Green LED, indicates a control card is inserted RESET: (1) Recessed pushbutton for hardware reset SETUP: (1) Recessed pushbutton with red LED for Ethernet auto-discovery LAN (rear): (2) Bi-color LEDs, left LED indicates Ethernet connection speed, right LED indicates Ethernet activity Power Requirements Power Pack: 2 Amps @ 24 Volts DC [2] Power over Ethernet: IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) PoE Powered Device Environmental Ethernet: 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, IEEE 802.3at Type 1 compliant USB: For computer console Temperature: 41° to 113° F (5° to 45° C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: <1 BTU/hr without cards using 24V power pack, 5 BTU/hr without cards using PoE [3] Connectors & Card Slots Card Slot: (1) 3-Series® control card expansion slot Chassis: Metal, black finish, vented sides Front Panel: Metal, black finish, polycarbonate label overlay Mounting: Freestanding, under-table mountable, or 1RU half-width 19-inch rack-mountable (adhesive feet included, under-table and rack mounting kits sold separately) LAN PoE: (1) 8-pin RJ45, female; 10Base-T/100Base-TX/1000Base-T Ethernet port; Power over Ethernet compliant 24VDC 2A MAX: (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input [2] G: (1) 6-32 screw, chassis ground lug COMPUTER (front): (1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only Height: 1.70 in (44 mm) without feet Width: 7.07 in (180 mm) Depth: 10.06 in (256 mm) Weight

Open the catalog to page 1

CEN-CI3-1 3-Series® Card Interface - 1 Slot CEN-CI3-1 – Rear View with No Card Installed MODELS & ACCESSORIES Available Models 1. ST-RMK Rack Mount Kit and UTK-1U-HALF Under-Table Mounting Kit each sold separately. 2. PWE-4803RU PoE Injector sold separately or included with 3-Series Card Interface model CEN-CI3-1-POE. PW-2420RU 24V power pack sold separately. 3. See individual control card spec sheets for additional specifications. CEN-CI3-1: 3-Series® Card Interface - 1 Slot CEN-CI3-1-POE: 3-Series® Card Interface - 1 Slot, w/PoE Injector Included Accessories PWE-4803RU: PoE...

Open the catalog to page 2

1.70 in 44 mm ©a 7.07 in 180 mm Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647 All brand names, product names and trademarks are the property of their respective owners. Specifications subject to change without notice. Revised 02/18/16

Open the catalog to page 3