C2N-VEQ4 4-Channel Volume/EQ Control Module The C2N-VEQ4 provides a very simple solution for adding professional quality volume control, equalization, and signal routing to any Crestron 2-Series control system. In a compact half-space rack-mountable chassis, the C2N-VEQ4 delivers four channels of digital volume and tone control, four 12-band graphic/parametric equalizers, and a fully-adjustable 4x4 matrix mixer. Dual DSPs and 24-bit 96 kHz A/D and D/A converters attain high-end audio performance perfectly suited for a multitude of applications in boardrooms, auditoriums, night clubs, and homes. The C2N-VEQ4 is controllable through any Crestron touchpanel, keypad, handheld remote, or e-Control®2 user interface, with true feedback provided for every parameter. Mixer and EQ needed. Such power and flexibility makes the C2N-VEQ4 ideal settings are easily configured and adjusted through Crestron's Media Tools software (part of Crestron Toolbox) for a host of mixing and multi-zone applications. and saved in presets stored onboard the C2N-VEQ4 module. Graphic/Parametric EQ Volume/Tone Control Each of the four output channels includes a full 12-band In its most basic configuration, the C2N-VEQ4 provides four equalizer eliminating the need for additional outboard individual audio channels which may be operated independently processors. Five selectable modes of audio equalization are or linked for stereo operation. Each channel includes available per output channel, providing up to 12 bands of adjustments for volume, bass, treble, and mute, with fully parametric EQ or varying combinations of parametric definable ramp times and scaling for fully customized operation. Protective relays on each output are included to graphic EQ including a filter set optimized for speech prevent "thumps" during power-up and provide 100dB attenuation for dead-silent muting. Five parametric EQ presets and ten graphic EQ "trim presets" may be stored onboard the C2N-VEQ4, allowing for save and Matrix Mixer recall of different EQ curves to account for changing room The 4x4 matrix mixer allows any input to be routed to any or acoustics, audio material, or listener preference. all output channels with full control over each individual The C2N-VEQ4 is a Cresnet slave device designed to level. Using the C2N-VEQ4, up to four line-level sources may communicate with any 2-Series control system via the be mixed and distributed to up to four destinations, with each destination receiving a different mix as needed. A bus. The C2N-VEQ4 is also available as the C2VEQ-4 Y-Bus master volume adjustment is also included to make overall expansion card for 2-Series card frames. level adjustment a snap. Five mixer presets may be stored onboard the C2N-VEQ4, with additional presets possible within the control system if

C2N-VEQ4 4-Channel Volume/EQ Control Module SPECIFICATIONS Features: 4x4 Matrix Mixer, 4-Channel Digital Audio comprising (4) balanced/unbalanced line-level audio inputs; Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced; Master Volume: -80dB to +20dB, 0.1dB steps (balanced I/O) Channel Volume: -80dB to +12dB, 0.1dB steps from Media comprising (4) balanced/unbalanced line-level audio Tools; -80dB to +0dB, 0.1dB steps from SIMPL (balanced I/O) Maximum Output Level: 4 Vrms balanced, 2 Vrms Bass/Treble Gain Range: ±15dB, 0.5dB steps Equalization Modes: 10-band graphic plus 2-band parametric;...

C2N-VEQ4 4-Channel Volume/EQ Control Module Mounting: Freestanding or 0.5U 19-inch rack-mountable (adhesive feet included, ST-RMK Dimensions Height: 1.80 in (4.57 cm); Width: 7.07 in (17.96 cm) Depth: 6.38 in (16.21 cm) Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647 Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905

C2N-VEQ4 4-Channel Volume/EQ Control Module Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647 Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905 All brand names, product names and trademarks are the property of their respective owners. ©2023 Crestron Electronics, Inc. | 15 Volvo Drive | Rockleigh, NJ 07647