AMP-X50MP
4Pages

{{requestButtons}}

Catalog excerpts

AMP-X50MP - 1

AMP-X50MP X Series Media Presentation Amplifier Convection Cooling The efficient design provides cool running operation to ensure long term reliability. The AMP-X50MP is high-density stackable with other Crestron X Series and Modular Amplifiers, allowing multiple units to be installed vertically in an equipment rack without needing extra ventilation space. Easy Installation Compact and versatile power amplifier Installation and setup of the AMP-X50MP is simple. Detachable connectors facilitate the termination of wiring. Balanced and unbalanced inputs can connect directly to the line output of a video projector or display, audio processor, mixer, or AV switcher. Independent controls for volume, bass, and treble allow a custom sound in any location. A knob cover is included with the product to protect against accidental changes to the front panel settings. 2 x 25 W per channel (1 x 50 W) into 4 or 8 Ohm speakers Fully Protected Stereo or mono-summed operation The AMP-X50MP features protection against overheating, shorted or overloaded speaker lines, excessive input signals, and other faults. In the case of a shorted speaker line, both outputs mute automatically until the fault condition is resolved. Remote power control ENERGY STAR® Certified Energy saving design reduces power consumption when idle An energy-efficient design enables the AMP-X50MP to meet demanding ENERGY STAR requirements. In addition to its high efficiency operation, the AMP-X50MP powers down automatically when no input signal is detected for more than 25 minutes, reducing overall power consumption and heat as part of an Energy Star® compliant system design. The amplifier quickly powers back on the instant an input signal is detected. A remote input can connect to a contact closure to place the amplifier in standby mode. Balanced, unbalanced, and stereo 3.5 mm inputs with auto summing Highly sensitive audio-sensing circuitry with high-speed wake time Convection cooled for noiseless operation Volume, bass, and treble adjustments Knob cover protects accidental changes to the device settings Captive speaker and power connectors for secure and robust connectivity Electronic short-circuit and overload protection Factory installed surface mount flange brackets are removable and reversible Quarter-Rack width for rack mounting with optional kit 60 W DC power supply with locking barrel connector and DC cable included The Crestron® AMP-X50MP is a low-cost audio amplifier solution that is suitable for a variety of applications. It features a compact, surface-mountable design that installs virtually anywhere without requiring an equipment rack. LoZ (4/8 Ω) and Hi-Z (70V or 100V) Output High-efficiency Class D circuitry delivers 25 W per channel to drive one pair of 4 or 8 Ohm speakers, making it ideal to support stereo speakers at the front of a room or mono speakers in the ceiling. The amplifier can also be used with HiZ (70/100V) speakers, delivering 50

Open the catalog to page 1
AMP-X50MP - 2

AMP-X50MP X Series Media Presentation Amplifier Specifications1 Audio Input Signal Types Balanced or unbalanced analog linelevel Output Power Mode (1) 3.5 mm connector, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24Vrms, +7 dBV (+9.2 dBu) (1) 5 pin 3.5 mm detachable terminal block; Balanced line level audio inputs; Maximum Input Level: 7.75Vrms, +20 dBu; Input Impedance: 20k Ohms (1) 2 pin 3.5 mm detachable terminal block; Connect to contact closure to place amplifier in standby mode. (1) M3 with captivated internal tooth lock washer screw; Chassis ground lug (1)...

Open the catalog to page 2
AMP-X50MP - 3

AMP-X50MP X Series Media Presentation Amplifier Power Main Power Power Consumption 14.6 W, 2 channels driven at 1/8th output power (4 ohms); 6 W, idle (Hi-Z mode) Environmental Temperature Model AMP-X50MP X Series Media Presentation Amplifier ENERGY STAR, ErP (1275/2008/EC), UL 62368, FCC Class B commercial and residential use Available Accessories For a list of available accessories, visit the AMP-X50MP product page. Construction Chassis Metal, convection cooled (fanless) Front Panel Metal, black finish with polycarbonate label overlay Freestanding, surface mount, or 1/4 width 1 RU 19 in....

Open the catalog to page 3
AMP-X50MP - 4

AMP-X50MP X Series Media Presentation Amplifier

Open the catalog to page 4

All CRESTRON catalogs and technical brochures

  1. TSW-1070

    9 Pages

  2. C2N-VEQ4

    4 Pages

  3. RMK-AMP-X

    7 Pages

  4. AMP-PNMK

    2 Pages

  5. AM-3200

    6 Pages

  6. HD-PS402

    7 Pages

  7. HD-PS401

    7 Pages

  8. HD-PS622

    7 Pages

  9. HD-PS621

    7 Pages

  10. TSW‑570

    7 Pages

  11. TSW‑570P

    8 Pages

  12. TSW-770

    9 Pages

  13. DM-NVX-E760C

    5 Pages

  14. TSW-1070R

    6 Pages

  15. HR-310

    3 Pages

  16. TSR-310

    5 Pages

  17. MC4-R

    5 Pages

  18. UC-B160-T

    6 Pages

  19. DGE-100

    6 Pages

  20. CEN-CI3-1

    3 Pages

  21. mp-amp30_1

    3 Pages

  22. MP-AMP30

    16 Pages

  23. cen-ups1250_1

    40 Pages

  24. Best_Light

    4 Pages

  25. AMP-3210T

    4 Pages

  26. AMP-8150

    4 Pages

  27. DMPS3-4K

    1 Pages

  28. DMPS3-4K

    2 Pages

Archived catalogs

  1. Adagio

    8 Pages

  2. iLux

    14 Pages