Catalogs >
CRESTRON >
AMP-8150

AMP-8150
4Pages

Catalog excerpts

AMP-8150 Avia™ 8-Channel Power Amplifier, 150W/Ch. >> High-efficiency eight-channel amplifier >> Robust and reliable performance >> Professional sound quality >> 150 watts per channel @ 4/8 Ohms >> Each channel configurable for Lo-Z or Hi-Z operation >> Model AMP-8150 supports 100-120V AC line power and 4/8Ω or 70V output >> Model AMPI-8150 supports 220-240V AC line power and 4/8Ω or 100V output >> Mono, stereo, and bridged modes >> Comprehensive fault and speaker protection per channel >> Extensive front panel status indicators and output meters >> High-speed Ethernet LAN connectivity >> Software configuration, control, and monitoring >> Crestron® control system integration support >> Crestron Fusion® enterprise management support [1] >> Rear panel +24 dBu balanced inputs and level adjustments >> Detachable terminal block connectors for easy servicing >> Single-space 19” rack mountable >> High-density stackable without extra vent spacing Crestron® Avia™ AMP-8000 series amplifiers are designed to complement the Avia family of digital signal processors, and are well-suited for all types of commercial audio applications. Each model furnishes eight channels of clean, efficient amplification in a space-saving 1 RU rack-mountable chassis. Each channel is configurable for Lo-Z or Hi-Z operation, as well as stereo and bridged modes. Network connectivity enables configuration, monitoring, and control via the Avia Audio Tool software, a Crestron control system, or Crestron Fusion®.[1] Solid & Efficient Performance Avia amplifiers are engineered to deliver exceptional performance and reliability with low distortion, low noise, and high power headroom. Advanced Class D technology maximizes efficiency to reduce power consumption and heat dissipation. An internal universal power supply with power factor correction ensures consistent performance with varying line voltages. Configurable & Controllable The AMP-8150 model delivers 150 watts per channel into 4 or 8 ohm “Lo-Z” loads. Each channel is individually configurable via software for use with “Hi-Z” distributed speaker systems (either 70V or 100V depending on model). Adjacent pairs of channels may be configured for stereo or bridged operation. Stereo mode enables remote control of a stereo pair of speakers using a single set of controls. Bridged mode allows two channels to be combined to provide a single channel delivering 300 watts into 8 ohms. Two versions of the AMP-8150 are offered. The namesake AMP-8150 model supports 4/8 ohm and 70V output, and operates on 100-120V AC line power. The “international” AMPI-8150 model supports 4/8 ohm and 100V output, and operates on 220-240V AC line power. Both models feature professionally balanced inputs and support input signal levels up to +24 dBu. Rear panel input attenuation controls allow for signal level matching. Remote level control and monitoring is enabled using the Avia Audio Tool software, or using a touch screen control panel or mobile device through integration with a Crestron control system. Integration with a control system also enables centralized monitoring and control of multiple amplifiers throughout a facility as part of a Crestron Fusion managed enterprise. Fully Protected Avia amplifiers feature comprehensive protection against overheating, shorted or overloaded speaker lines, excessive signal levels, and other faults. Each channel is independently protected, allowing an individual channel to enter protection mode without interrupting the operation of other channels. Protection is automatic, quickly disconnecting the speaker line and shutting down the affected channel, and then restoring normal operation once the fault is resolved. Clear indication of any fault is provided on the front panel, and may also be reported to a control system to provide notification on a touch screen or mobile device, through a text message or e-mail, or at a central help desk

Open the catalog to page 1

Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, SSH, SFTP (SSH File Transfer Protocol) USB Device: USB device port for computer console (setup) Audio Input Signal Types: Balanced or unbalanced analog line-level Output Signal Types: 4/8 Ohm, 70 Volt direct-coupled (AMP-8150 only), 100 Volt direct-coupled (AMPI-8150 only) Operating Modes: (Configurable via Avia Audio Tool software) Mono: Each channel is configurable to operate independently from all other channels Stereo: Adjacent channels (1&2, 3&4, 5&6, 7&8) are...

Open the catalog to page 2

AMP-8150 Avia™ 8-Channel Power Amplifier, 150W/Ch. FUSE: T6AH250V (AMPI-8150): Main fuse; 5 x 20 mm, 6.3A, time-lag, 250V, ceramic Mounting: Freestanding or 1 RU 19-inch rack-mountable (front rack ears and rear support brackets included) G: (1) 6-32 screw; Chassis ground lug COMPUTER (front): (1) USB Type B female; USB computer console port (for setup only) Controls & Indicators Height: 1.72 in (44 cm) Width: 17.28 in (439 mm); 19.00 in (483 mm) with rack ears Depth: 14.69 in (374 mm) PWR: (1) Bi-color green/amber LED, indicates operating power supplied from AC line power, amber...

Open the catalog to page 3

Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647 AH brand names, product names and trademarks are the property of their respective owners. Specifications subject to change without notice. Revised 04/11/17

Open the catalog to page 4