An-10 Wireless Technology Catalogue
18Pages

An-10 ® Wireless lighting control technology An-10 Issue 1.0

An-10 | Wireless Lighting Control CP Electronics has been designing and developing lighting control solutions for the commercial, industrial and public sectors since 1970. Innovative products, seamless support In today's climate of growing environmental awareness and rising energy prices, saving energy is becoming more vital than ever. At CP Electronics, we've been developing and manufacturing energy saving controls for lighting, heating and ventilation for almost 40 years. Our experience and expertise can help you and your customers reduce your carbon footprint and save you money at the...

An-10 | Wireless Lighting Control 3 An-10 wireless technology allows you to install a fully featured lighting control system easily and with minimal disruption An-10 has been specifically created to allow you to embrace the advantages of wireless technology, while at the same time offering all of the features and functionality demanded by modern day lighting control systems. An-10 Simple Installation ● ● ● ● ● Wireless signals can pass through walls, floors and ceilings, so you can position switches and detectors exactly where you need them. No need to run costly control wires between...

An-10 | Wireless Lighting Control 4 Cost effective, safe and dependable As well as being competitively priced, the An-10 system offers considerable savings over conventional wireless lighting control systems, whilst providing a very cost effective alternative to conventional wired systems. The An-10 wireless range achieves significant reductions in total system cost through cheaper installation. An-10 allows for a system to be expanded simply and cost-effectively. total system cost Cost Effective An-10 wireless system Completely Safe Concern about being exposed to radio waves is something...

An-10 | Wireless Lighting Control 5 Flexible, independent device addressing An-10 Device Addressing Every An-10 device within a system uses a number of different address codes that identify Miniature its place within that system and how it interacts with other devices. PIR A Building Code is used to identify devices that form part of the same overall system. This allows An-10 systems in adjacent buildings to be completely independent and prevents cross-system interference. A Local Code typically defines all devices in a specific location. For example, the switch plates, sensors and...

Presence and absence detection explained Presence Detection Absence Detection Presence detection uses a detector to automatically turn lights on when a room is occupied and off when the room is empty. Absence detection requires a user to manually turn lights on using a wireless switch input unit, and a detector turns the lights off when the An-10 detectors provide absence or presence detection. An introduction to detector types: Switching detectors with lux level sensing Introducing Daylight Linked Switching The PRM detectors provide on/off load control. They can be easily programmed via...

An-10 | Technology Guide 7 Dimming detectors with lux level sensing The Highest Level of Technology Maintained Illuminance (illustrated below) The dimming detectors provide both on/off load control and dimmable control of either DSI or DSI/DALI digital ballasts or 1-10V analogue ballasts. Where natural light is available, dimming the luminaire allows the level of artificial lighting to be balanced with daylight, maintaining a near constant light level (maintained illuminance). This is also known as ‘daylight harvesting’ or ‘daylight linking’. They can be easily programmed via the IR handset...

An-10 | Products and Features 8 Slim-line Ballast Controllers ● Switched or dimmable control of DSI, DALI or 1–10V ballasts. ● Available as a standalone unit or built- in unit for integration into 3rd party luminaries. Adjustable Ceiling Mounted Microwave ● Microwave presence detectors are sensitive to movement and are ideal for large or awkwardly shaped spaces. ● This presence detector is available in switching or dimming. Please see pages 6-7 for more information. Switch Input Unit ● Up to 7 volt-free inputs for use with standard or custom-made switch/button plates. ● Simple configuration...

An-10 wireless technology allows you to install a fully featured lighting control system Please see pages 14–17 for sample configurations

An-10 | Wireless Lighting Control An-10 | Products and Features 10 10 Vitesse Modular Adaptors ● Allows the An-10 system to work with the Vitesse Modular™ lighting distribution range. ● Simple plug-in design, available in both switched and dimming versions. Vitesse Modular™ is our state of the art lighting distribution system that can be easily adapted for layout changes and expansion. For more information please see the Vitesse Modular range in our main catalogue. Ceiling PIR Presence Detectors ● PIR presence detectors detect body heat and movement making them ideal for smaller spaces or...

An-10 | Wireless Lighting Control Slim-line Ballast Available as standalone (SA) units for general use or built-in units for integration into 3rd party luminaries. Detection Pattern high sensitivity lower sensitivity Visit www.cpelectronics.co.uk for our latest product news

Microwave Presence Detection Pattern Examples Detector head position set to 80° Detector head position set to 80° Detector head position set to 0° high sensitivity lower sensitivity

An-10 | Wireless Lighting Control Vitesse Modular 1) Vitesse Modular 4 Adapter 2) Vitesse Modular 6 Adapter Common Specifications For further information please call our sales team on +44 (0)333 900 0671

An-10 | Example Applications 14 Small office Set-up Operation ● Four ceiling lights are controlled by the dimmable output of a ● Pressing a button on the wall plate sends a wireless message to the PIR detector. ● The PIR detector is configured for absence detection. ● A push-button wall plate is connected to a concealed switch module. PIR detector which either turns the lights on, sets them to a preset level, or turns them off. ● The lights are automatically turned off when the room is unoccupied. ● All An-10 devices are set to the same Local Code. Luminaires Detectors Switching and/or...