Dollies
6Pages

Rolling tractored dollies Frame made of rigid steel sheet with 4 castors (diamond-positionned) with 2 swivel castors. Plate on dolly can be fixed, tilting or rotative. Allows the dispatching of parts in European standardized pallets or containers (800 x 600 mm to 1 600 x 1 200 mm) from unloading areas to production line borders on smooth, clean and plane floors. Innovating device through the use of a coupling casing + hook-ball with triple positive safety fixed less effort, less noise RENAULT, FORD ...), automotive subcontrators, food-industry

adapted on existing dollies. * a support plate with a tow bar equiped with a ball-coupling casing, a double push handle, a holding hook in raised up position and two elastic stops (for a great reliability without * a support plate equiped with a hook-ball and This device brings: a reduction of noises by pushing and an increase of safety by coupling and driving thanks to the coupling device with triple positive safety a better driving for trains of dollies as 5 Transsilence dollies are quite isotrace and 7 Transsilence dollies give only a slight Manufactured with ribbed steel sheet which...

Our dollies have been with a fork-lift truck. Transsilence have been engineered to be easily handled ortractored. The pushing effort for making a dolly to roll (tare of about 175 kg) with a load of 800 kg Moreover the special coupling device allows a quick and easy coupling of dollies in a train in total safety as there is no possibility of casual hooking or unhooking thanks to our triple positive safety device. Triple positive safety device : * Unintentional hooking not possible Automatic locking latch Anti-unhooking cam with automatic gravity (without quite any maintenance or visual...

Tilting plate The Transsilence dolly can also be proposed in a version with a tilting plate. You only need to pull the unlocking handle of the plate so that it can tilt by 20" without The Transsilence dolly can also be manufactured with a rotative plate. In this version, a simple push on the locking foot pedal allows you to unlock the system for a rotation of the load without moving the dolly with rotative plate

dolly brings a great position (locked by an automatic holding hook) to pull or push the Transsilence dolly. The stength for vertical position is about of 6 daN. The unhooking is made by tiptoe. position, the operator must push on the safety latch integrated in the handle (device tested on a cycle of 40 000 Both elastic rubber stops on the tow bar support oblige the operator to push down with force on the tow bar to allow the locking on the hook-ball, thus avoiding any non-willed unhooking and keeping the front swivel castor in contact with the floor which avoids it to

Fixed plate, height 400 mm (also existing with a 300 mm height). Coupling device with hooking casing + hook-ball with safety anti-unhooking cam. Specific Coutier castors, diamond-positionned with swivel-pin on ball bearings. For pallets with following dimensions : Tilting plate with hydraulic jack, height 400 or 510 mm. Coupling device with hooking casing + hook-ball with safety anti-unhooking cam. Specific Coutier castors, diamond positionned with swivel For pallets with following dimensions : (fixed tilting angle, for example 17°, height of (variable tilting angle, height of support plate...