*myarchiexpo

Costacurta_TYPE G

Product catalog summary

Wire Mesh Type g Overview
This document describes a specific type of wire mesh known as Type g, characterized by its construction using straight wires in the warp and pre-crimped wires in the weft. This results in a particularly resistant, heavy, and rigid mesh with a compact surface and low transparency.

Specifications

Material: Available in stainless steel, COR-TEN, and coloured steel.
Warp and Weft: Rigid wires with a diameter of 1.60 mm.
Pitch: 2.81 x 2.52 mm.
Open Area: Approximately 16%.
Total Thickness: Approximately 4 mm.
Weight: Approximately 11.5 Kg/m².
Maximum Width: 1600 mm.

Main Applications

Safety balustrading
Gates and doorways

Product Reference
ARChI-NeT® g.100

Catalog excerpts

TYPES | TYPe g This is a wire mesh obtained by weaving straight wires in the warp and pre-crimped wires in the weft. Particularly resistant, heavy and rigid, it has a very compact surface with low transparency. This wire mesh is suitable for external protection elements: gates, doorways and safety balustrading. Available in stainless steel, COR-TEN, coloured steel.

Open the catalog to page 1

g ARChI-NeT® g.100 standard material Stainless steel Warp Rigid wires Ø 1.60 mm Weft Rigid wires Ø 1.60 mm Pitch 2.81 x 2.52 mm Open area 16 % ~ total thickness 4 mm ~ Weight 11.5 Kg/m2 ~ Max. width 1600 mm Main applications • Safety balustrading • Gates and door

Open the catalog to page 2

Costacurta_TYPE G

Costacurta_TYPE G

Catalog excerpts

All Costacurta S.p.A.-VICO catalogs and technical brochures