TECHNICAL DATA SHEET NA/ENGLISH <$ni$ Corian. DUPONT™ JOINT ADHESIVE FOR USE WITH QUARTZ AND SOLID SURFACES PRODUCT DESCRIPTION DuPont™ Joint Adhesive is a specially formulated two-part reactive seam adhesive to be used with DuPont surfacing materials. DuPont™ Joint Adhesive is available in 50 mL and 470 mL cartridges and a variety of colors which are color-coordinated with DuPont surfacing materials. It is intended for rigidly bonding two surfaces of the same compositions. It is not intended for bonding dissimilar materials unless specifically approved by DuPont. DuPont™ Joint Adhesive meets the Low VOC emission limit requirements of South Coast Air Quality Management District (SCAQMD) Rule 1168. DuPont™ Joint Adhesive is GREENGUARD and GREENGUARD Gold certified. DuPont™ Joint Adhesive can be considered a low-emitting material that will not negatively impact indoor air quality. TYPICAL ADHESIVE PHYSICAL PROPERTIES For example, a cartridge with US1017 012 should be used by October, 2017. PROFESSIONAL USE ONLY DuPont™ Joint Adhesive should only be used by personnel who have reviewed the SDS, instructions on use and are wearing the proper protective equipment. KEEP OUT OF REACH OF

DUPONT™ JOINT ADHESIVE FOR USE WITH QUARTZ AND SOLID SURFACES STORAGE To insure the longest shelf life, the adhesive should be stored in a well-ventilated room, in the dark, at 75°F (24°C) or lower. Cartridges should be stored on their sides. Follow local regulations for flammable material storage. Use precautions during transport, as vehicles can rapidly reach elevated temperatures. Exposure to elevated temperatures will shorten shelf life. Do not place in freezer. In order to minimize viscosity issues, the adhesive should be stored above 55°F (13°C). REFERENCE STANDARDS ASTM D790, Standard...