SOLUS II
2Pages

SOLUS II SOLUS at the Princess Elisabeth Antarctic Research Station SOLUS II – Combined systems for maximum energy savings Stratified buffer tank with fresh water technology The universal „heat power plant“ The SOLUS series combination tanks are standards in high-efficiency installation for solar heating support. For more than 20 years, more than 40,000 installations equipped with this technology have been in use throughout Europe. Whether it is a single or collective house, a villa or a hotel, the heat store can be perfectly integrated and completed with all high-efficiency systems. There are many possibilities for combining with different heating systems and hot water tanks, whether with existing or even new boilers (fuel oil, gas, wood, pellets), but also with heat pumps. Less bulky, more efficient By combining the water heater and heating system into a single heat store, you save space in your plantroom. Thanks to the angled connections, which act as a thermal brake, heat loss is considerably reduced. To minimize these losses, the SOLUS system features high efficiency LEEPS foam insulation and 2 cm of insulating fleece, which allows it to retain heat for several days. SOLUS II-Comfort-Pro (560L/1050L) are the first steel combination stores to be awarded the „Blue Angel“ label, which rewards outstanding environmental efforts. Efficiency and savings The patented Consolar high efficiency high heat exchange system of the Comfort and Comfort-Pro lines ensures that water heated by the sun is directed upwards through the appropriate ducts, and can therefore be instantly used for consumption. This means that the boiler does not need to be started as frequently. In addition to that, compared to heat stores equipped with integrated hot water cylinders, it is possible to draw heat continuously. High efficiency internal water heater The cold water is heated by the internal water coil due to temperature differences in the heat exchanger housing, and the cooled buffer water is deposited in layers at the bottom of the storage tank. This brings benefits in terms of water hygiene. The completely passive system, which has been tested several thousand times, allows very reliable operation throughout its lifetime, without pumps or control. SOLUS-TUBO installations have been given excellent marks in efficiency tests. As a result, these installations redefine the standard for solar thermal installations. Compatibility and compact design SOLUS systems can easily be connected to almost all types of boilers and heat pumps. Comfort range: significant energy savings are possible while ensuring comfortable hot water production. This storage tank is also available without integrated heat exchangers and as a buffer module without integrated heat exchanger, for example for combination with external fresh water station or to increase storage capacity. Comfort-Pro range: compared to the Comfort range, this one has a hot water heat exchanger, which allows even more hot water to be produced at the same time or to lower the temperature required to heat the water. The SOLUS II combined buffer tanks have been selected for the Belgian Princess Elisabeth Antartica science station in combination with TUBO collectors and have been in service there since 2009. SOLUS II 560L and SOLUS II 1050L have been awarded the „Blue Angel“ quality label. ·· Reduction of heat loss ·· Low heat loss rate ·· Energy saving w

SOLUS II 1050L PVT SECTION SOLUS II 1050L SECTION Hygienic hot water through a heat exchanger Downflow pipe for cooled reservoir water Steel pressure vessel for direct connection to the boiler and heating circuit Exhaust tube for heated buffer water for immediate solar thermal use Combined diverter plate for heating and boiler flow Connections with conductive sheet for layering without mixing heating returns Ball valve for the pre-heating of the lower reservoir area Solar heat exchanger NEW: SOLUS 850L PVT and 1050L PVT The new SOLUS cylinders for combining PVT modules with brine heat pumps...