venice
venice
- Tiles are dimensionally accurate and easy to install using thinset and rapid setting adhesive over a level and cured slab.
- Use quality sanded grout and wet scrub the surface before sealing.
- Compressive strength is greater than 8000 psi, and the tiles meet ASTM standards for freeze-thaw resistance.
- Weight varies with thickness: 5/8’’ = 7.5 lb/sq.ft, 3/4’’ = 10 lb/sq.ft.
- Color variations are expected and should blend like stone.
- Ensure substrate is cured to a maximum of 4% moisture and level within 1/8” over 10 feet.
- Use Laticrete 254 Platinum Rapid adhesive and Laticrete Permacolor sanded grout.
- Maintain grout joints at 0.5% of the longest tile edge, no less than 1/8”.
- Place expansion joints every 15 feet and at all perimeter walls and columns.
- Protect the installation with ramboard or masonite during construction.
- Store crates indoors or cover them to protect from elements and damage.
- Tiles should acclimate to the final environment for 48 hours prior to installation.
- Inspect consignment upon delivery and report any damage immediately.
- Ensure tiles are wet-scrubbed and sealed before use.
- Routine care involves cleaning with warm water and pH-neutral detergent.
- For commercial settings, use a floor machine or auto scrub regularly.
- Periodically, a deeper clean can rejuvenate the floor's appearance.
- Wet-scrub with a floor machine using HTC Twister white pad and ample clean warm water.
- Re-seal with Prosoco Polishguard, applying several thin coats with a microfiber applicator.
Catalog excerpts
venice technical product info terrazzo tiles venice technical product info venice terrazzo concrete tiles are dimensionally accurate and installed with the ease of tile. simply thinset, using a rapid setting adhesive, over a level and cured slab. use quality sanded grout. once installed, the surface should be wet scrubbed and sealed. pads and sealer are available f rom concrete collaborative. always reference tcna guidelines for general best practices.
Open the catalog to page 1
technical summary 1/3 offset running bond standard size* *lft's not recommended for 50% running bond and herringbone/chevron patterns.
Open the catalog to page 2
tile is just the finished surface and a successful tile installation is intrinsically linked to the floor system. a quality installer with experience with artisan tiles should follow manufacturer's recommendations as well as adhesive manufacturer's substrate recommendations and adhere to industry standards, like the tcna guidelines, to ensure a sound system and quality installation. large format tiles require additional system considerations. - concrete tiles are similar to natural stone tile (rectified/uncalibrated) to suit our stated caliber and size range which vary less in facial dimension...
Open the catalog to page 3
- establish expansion joint locations based on substrate and site conditions. - install anti-fracture and or moisture barrier like laticrete hydroban, in consideration of substrate i.e., slab-on-grade, moisture prone environment, existing cracks and movement in substrate. - thin-set: laticrete 254 platinum rapid. - grout: laticrete permacolor sanded grout. - cleaning pad: htc twister white. - sealer: prosoco polishguard. - special consideration for walls, stairs, wet areas. - use laticrete 254 platinum rapid thin-set or approved equivalent. - use laticrete 4xlt rapid medium-set or approved equivalent...
Open the catalog to page 4
- the wet-scrub process is transformative in improving the overall floor finish as well as preparing for sealer. - re-apply floor protection during construction. - ensure tile and grout is completely dry prior to sealing. - follow sealer manufacturer's recommendations. - apply several thin coats of sealer. - apply using microfiber applicator dampened with sealer. - work in small and manageable sections to allow sealer to dry between coats. - sealer should be applied to maintain a natural finish (non-glossy). - do not over apply sealer and wipe off any excess. - allow proper dry time and cure...
Open the catalog to page 5
