Laguna
Laguna
- Laguna polished concrete tiles are dimensionally accurate and easy to install using thinset adhesive like Laticrete 254R Platinum Rapid over a level and cured slab.
- Use quality sanded grout such as Laticrete Perma Color Grout.
- Surface should be wet scrubbed with HTC Twister cleaning system and sealed with Prosoco Polishguard.
- Reference TCNA guidelines for best practices.
- Standard and large format tile (LFT) sizes are available.
- LFTs are not recommended for 50% running bond and herringbone/chevron patterns.
- DCOF (ANSI B101.3): 0.60
- Compressive strength: >8000 psi
- IBC flame spread rating: A (0-25 ft/hr)
- Freeze-thaw resistance: Meets ASTM C936/C1645 standards
- Weight: 5/8” = 7.5 lb/sq.ft, 3/4” = 10 lb/sq.ft
- Thickness tolerance: Varies, not fully gauged
- Color variations expected, blend like stone
- Curvature tolerance: ± 0.5% of max tile length
- Substrate should be cured to max 4% moisture, level 1/8” in 10 ft
- Grout joint: 0.5% of max tile length, minimum 1/8”
- Store crates indoors or cover to protect from elements.
- Tiles should acclimate to the final environment for 48 hours prior to installation.
- Inspect consignment upon delivery and notify manufacturer of any damage.
- Prepare a complete installation mock-up in the final environment.
- Concrete or cement board are suitable substrates; do not install directly to drywall or wood.
- Use Laticrete 254 Platinum Rapid thin-set or equivalent.
- Blend tiles from different crates to enhance natural tone.
- Maintain grout joint of 0.5% of the longest tile edge, no less than 1/8”.
- Place expansion joints spaced at 15’ in each direction.
- Ensure floor is adequately wet-scrubbed and sealed prior to use.
- Routine maintenance includes daily cleaning with warm water and pH-neutral detergent.
- Periodically, a deeper clean can rejuvenate the floor's appearance.
- Re-seal with Prosoco Polishguard as needed.
Catalog excerpts
laguna technical product info polished concrete tiles laguna technical product info laguna polished concrete tiles are dimensionally accurate and installed with the ease of tile. simply thinset, using a rapid setting adhesive equivalent to laticrete 254r platinum rapid, over a level and cured slab. use quality sanded grout like laticrete perma color grout. once installed, the surface should be wet scrubbed using the htc twister cleaning system and sealed using prosoco polishguard. pads and sealer are available from concrete collaborative. always reference tcna guidelines for general best practices.
Open the catalog to page 1
technical summary 1/3 offset running bond *lft's not recommended for 50% running bond and herringbone/chevron patterns.
Open the catalog to page 2
tile is just the finished surface and a successful tile installation is intrinsically linked to the floor system. a quality installer with experience with artisan tiles should follow manufacturer's recommendations as well as adhesive manufacturer's substrate recommendations and adhere to industry standards, like the tcna guidelines, to ensure a sound system and quality installation. large format tiles require additional system considerations. - concrete tiles are similar to natural stone tile (rectified/uncalibrated) to suit our stated caliber and size range which vary less in facial dimension...
Open the catalog to page 3
- establish expansion joint locations based on substrate and site conditions. - install anti-fracture and or moisture barrier like laticrete hydroban, in consideration of substrate i.e., slab-on-grade, moisture prone environment, existing cracks and movement in substrate. - thin-set: laticrete 254 platinum rapid. - grout: laticrete permacolor sanded grout. - cleaning pad: htc twister white. - sealer: prosoco polishguard. - special consideration for walls or wet areas. - use laticrete 254 platinum rapid thin-set or approved equivalent. - use laticrete 4xlt rapid medium-set or approved equivalent...
Open the catalog to page 4
- ensure tile and grout is completely dry prior to sealing. follow sealer manufacturer's recommendations. - apply several thin coats of sealer. - apply using microfiber applicator dampened with sealer. - work in small and manageable sections to allow sealer to dry between coats. - sealer should be applied to maintain a natural finish (non-glossy). - do not over apply sealer and wipe off any excess. - allow proper dry time and cure time (7 days) prior to use. - re-apply floor protection during construction. - ensure your floor has been adequately wet-scrubbed and sealed prior to use. - should...
Open the catalog to page 5
