MASTIC METAL PURPOSE : Flexible and light polyester two-pack compound to repair metals. Interior - Exterior Provides an excellent adhesion on metals and plastic substrates (PVC). Fills and repairs metals and plastic substrates. Non-porous and thin finishing, non-shrink and easy to even Quick-drying and easy to sand by machine or manually. Does not clog sanding paper Can be covered by all types of finishing. Withstands occasionally extreme temperatures of -30°C to 110°C. Ferrous and non-ferrous metals, and plastic substrates (PVC, gelcoat…) APPLICATION EQUIPMENT : . Putty knife or coating knife, trowel. Finish : Color : Matt Cream TECHNICAL CHARACTERISTICS : AFNOR Classification VOC in can VOC in indoor air (28d) Density at 20°C Viscosity at 25°C Weight of dry extract Volume of dry extract Specular gloss (to 60°) Binder Solvent Flash point Conservation A 0,77 ± 0,05 1,5 ± 0,2 Poises 16 ± 2 % 35 ± 2 % > 80 % Mix of waxes White spirit 23 to 55°C 12 months in closed original packaging (protected from heat and freezing) HEALTH AND SECURITY : Safety Data Sheet available on www.quickfds.com Dangerous product – Follow usage precautions.

MASTIC METAL Application characteristics : Manipulable : Sandable : Coverable : DILUTION : Equipment cleaning : Ready to use Diluant Synthétique, Renov’Brosse or acetone immediately after application. Mix the sealant and add 2% to 3% hardener (a small dollop of hardener for a tablespoon of sealant) until an even finishing. Usage limit of mixture: 4min at 20°C APPLICATION ADVICE : See DTU 59.1. Follow instructions and work on solid, clean and dry surfaces (humidity < 4% of weight). SUBSTRATE Ferrous metals 5 minutes (decreases when temperature increases) 20 to 30 minutes 1 hour. PREPARATION 1-Cleaning...