C Series
12Pages

GREY line CE Series Hood dishwashers

5 good reasons to choose the CE Series 1 Economy While waiting for the rack to be loaded, CE series hood dishwashers heat the water to a temperature lower than the setting to allow considerable energy saving. They are also equipped with an ECO programme to reduce the consumption of rinse water, detergent and electricity. 2 Performance The RCD (rinse control device) guarantees optimal rinsing even when the mains pressure changes. When the machine is connected to a cold water system, the QHS (quick heating system) uses hot water from the built-in boiler to fill the wash tank reducing the...

GREY line hood dishwashers The range The high-tech systems featured in CE dishwashers guarantee excellent performance, hygiene, reliability and low consumption. The HAC control board is used to select the QHS and adapt the washing programme to the user’s requirements. The electronic control panel with backlit button displays the operating status along with digital display showing working temperatures as well as any possible alarm in self-diagnosis mode. ECO cycle with reduced water, electricity and detergent consumption, available for moderately dirty dishes. The vertically installed pump...

Applications • Pubs • Canteens • Restaurants • Hotels • Hospitals ADVANTEGES • AISI 304 stainless steel frame, tank and panelling • Double skin deep drawn tank and self-draining pump • Self-diagnosis function with coded messages • HPS: HACCP data acquisition ready • Independent set of wash, pause and rinse times, and temperature for each programme. • Electronic control panel with digital display and multifunction key, showing different colours to indicate machine status (heating, ready, running) • Automatic cycle start when hood is closed or button pressed • ECO cycle with reduced...

GREY line WASHING SYSTEM Patented WRIS washing system: through a double jet of water constantly acting on the dish surfaces, this system grants top washing results even with the utmost soil. TANK FILTERS A flat filter covers the entire wash tank and a Dynamic filter cleans the water continuously, retaining all the dirt. ROUNDED EDGES The washing chamber with rounded edges prevents the build up of soil and allows the housing of the vertical self draining pump.

HOOD The hood opens at the rear to prevent steam blowing into the operator’s face. In machines equipped with CRC, the hood facilitates extraction of the steam, which is then reused for heating the cold water, achieving a further energy saving. Clearance With 440mm clearance bigger items to be washed. REMOVABLE RACK HOLDER The rack holder is easy to remove to facilitate cleaning. CONTROL PANEL The user a backlit button that changes colour according to the machine status: RED= heating, GREEN= standby, BLUE= washing, YELLOW= alarm.

GREY line WASHING SYSTEM Easy to remove and easy to clean stainless steel wash arms with debossed jets. TANK FILTERS The entire wash tank is covered by four flat stainless steel filters and one for the pump. ROUNDED EDGES The washing chamber with rounded edges prevents the build up of soil and allows the housing of the vertical self draining pump.

HOOD The hood opens at the rear to prevent steam blowing into the operator’s face. In machines equipped with a CRC, the hood facilitates extraction of the steam, which is then reused for heating the cold water, achieving a further energy saving. Clearance Rack size is 500x500mm with 440mm clearance or extra large rack 500x600mm with 540mm clearance. REMOVABLE RACK HOLDER The rack holder is easy to remove to facilitate cleaning. CONTROL PANEL The user a backlit button that changes colour according to the machine status: RED= heating, GREEN= standby, BLUE= washing, YELLOW= alarm.

HPS CONNECT An advanced system, complementary to the HAC board, which in the event of machine malfunction automatically sends an sms to the field engineer. The HAC electronic card also makes it possible – through an RS232 serial port – to send the parameters characterising the washing cycle underway and any alarms directly to a printer or PC, in compliance with HACCP data acquisition ready. HAC control panel Machines in the CE series come standard with an HAC board which allows reprogramming washing, pause and rinse times to best suit user’s specifications. It also displays the washing...

Technical info wash cycle (secs.) theoretical* max. output racks/h total power warm water connection 55°C (kW) total power cold water connection 15°C (kW) two arms wash assembly four arms wash assembly four arms wash assembly sanitising system detergent dispenser EXTERNAL DIMENSIONS height with hood closed/open (mm) height with CRC (mm) OTHER DIMENSIONS rack dimensions (mm) rinse water consumption (L) weight (Kg) power supply (V) OPTIONAL and deatiled RCD wash system drain pump * In case of consecutive washing, the duration of the cycle might increase to ensure proper rinse temperature....

ECO2: THE FORMULA FOR ENERGY SAVING Comenda’s philosophy is represented by a green petal defining the company commitment to research and application of hightech formulas which combine high performance with energy savings. ECO2 is the key to the entire production: eco-friendly solutions granting excellent results and a healthier working environment. This “green” philosophy also inspires the CE series: a vast range of washing systems that can adapt to a great variety of different needs, always guaranteeing top performance with very low operating costs and reduced water and detergent...