GMT1616-WHITE LIGHT-24V

1 / 11 PagesView full catalog

GMT1616-WHITE LIGHT-24V

Product catalog summary

Reliability Test Summary

Mechanical Strength: The product is tested for mechanical strength using a hammer with a spring impact energy of 0.7J.
IP Rating: Achieves IP67, indicating strong protection against dust and water ingress.
Winding Test: Involves winding around a φ150mm cylinder with a 60N pull, performed at -25℃ and -15℃ for 16 hours each.
Cold Bend and Impact Tests: Includes bending on a mandrel at -15℃ and impact testing with a hammer drop from 100mm.
Insulation and Electrical Strength: Insulation resistance must be ≤ 2MΩ at 500V, and electrical strength is tested at 60℃ and 85% RH.
Bending and Torsion Tests: Sections are bent 100 times in each direction, and torsion involves 3000 clockwise twists.
Disassembly and Assembly: Repeated 10 times to ensure durability.
Temperature Tests: High and low temperature storage at 80℃ and -40℃ for 168 hours each.
High Temperature and Humidity Impact: Tested with a 5% salt solution for 24 hours.
IK Rating: Impact tested five times on each exposed surface.
Lifetime Aging and Switch Tests: Conducted at 35℃ for 6000 hours and switch tested 10,000 times.
Safety Compliance: Meets IEC 60598-1 and IEC 60598-2-21 standards.

Precautions Summary

Avoid physical damage such as trampling, excessive distortion, and violent stretching.
Use an isolated power supply with less than 5% ripple and reserve a 20% power margin.
Handle carefully to prevent electric shock and ensure correct polarity.
Avoid scratching, twisting, and irregular bending during installation.
Do not bend the light strip in an arc with a radius less than 60mm/80mm (DMX).
Ensure the application length does not exceed the specified use length.
Avoid prolonged exposure to the light-emitting surface.
Installation, disassembly, or repair should be performed by professionals only.
Use silicone sealant instead of acidic or alkaline adhesives.
IP67 products are not suitable for underwater use in swimming pools.
Check color consistency before use and ensure consistent environmental conditions.
Use professional cutting tools and seal products after cutting to prevent exposure to organic environments.

Catalog excerpts

Light source: Adopting dedicated and outdoor-specific LED, stronger reliability for outdoor application; Finished product ANSI SDCM<5; • Structure: New anti-tension structure, Integrated anti-tension silicone extrusion process, against internal stress and external tension; Double-layer circuit conductive, double power supply guarantee, broken boards without power; • Product applications: outdoor illumination, architectural facade lighting; IP67 • Product certification: CE,UKCA • Working/storage temperature: Ta: -25~50°C / 0~60°C • 5 years warranty, life span > 60000 hours. [Basic Parameters]...

Open the catalog to page 2

【Basic Parameters】 Model Rated Maximum power power （w/m）（w/m） Standard Length Cutting Unit Note: 1. The above parameters are tested based on 1m/3.28ft standard products; 2. The luminous ﬂux is allowed to have an error range of -15%; 3. The above parameters are typical values; 4.※RGBW/DMX-RGBW should be used in -20℃~45℃ ambient temperature if four colors are used at the same time. 【Light Distribution】 Flux out:452.8 lm Note:The Curves indicate the illuminated area and the average illumination when the luminaire is at different distance. Light distribution Effective average illuminance Note: The...

Open the catalog to page 3

【Product mechanical parameters】 · IP67 molded end cap （ENP） Bottom *RGB/RGBW/DMXSide exit wires have a dark area of about 2cm

Open the catalog to page 4

Accessories Picture quantity net Per box Gross /case weight net weight Box Size Order m°ael (PCS) (kg) weight (kg) (mm) Aluminum clip Size: L1000*W18.6* H21.1mm with screw Size: L25*W18.6* H21.1mm with screw Size: L1000*W19.2 H41.8mm with screw Size: L25*W19.2* H41.8mm with screw suitable for monochromatic led strip Wire lengths are optional: 0.25M/0.5M/2M suitable for monochromatic led strip Wire lengths are optional: 0.25M/0.5M/2M suitable for monochromatic led strip Wire length 150mm suitable for RGB led strip Wire lengths are optional: 0.25M/0.5M/2M E-mail:[email protected] www.colorsled.com...

Open the catalog to page 5

【Product Wiring Schematic】 POWER Black： + Red： R Green： G Blue： B RGBW Controller Black： + Red： R Green： G Blue： B White： W A/DAT+ B/DAT- ADDR/PI

Open the catalog to page 8

【Packaging Solutions】 · standard packaging 1 Voltage: Power(Typ): Color/CCT: CRI: Lumen: IP: SO: LIGHT SOURCE ITSELF without IP Process cover 4.USE ONLY WITH CLASS 2 POWER UNIT. CAUTION: THE MOUNTING MEANS PROVIDED WITH THIS LUMINAIRE HAS NOT BEEN EVALUATED FOR RELIABILITY. IF INSTALLED WHERE FAILURE OF THE MOUNTING MEANS COULD CAUSE INJURY TO PERSONS OR DAMAGE TO PROPERTY BEOW , SUPPLEMENTAL MEANS OF SECUREMENT SHOULD BE CONSIDERED. CAUTION: 1. SUITABLE FOR CABINET USE ONLY. 2.SUITABLE FOR OPERATION IN AMBIENT NOT EXCEEDING 45°C. 3.SUITABLE FOR DAMP LOCATION. GMT1616 Voltage: Power(Typ): Color/CCT:...

Open the catalog to page 9

· Please use an isolated power supply to drive the LED light bar, and the ripple of the constant voltage source is less than 5%. Do not use resistance-capacitance step-down, non-isolated power supplies to drive the LED light bar. · In actual applications, the power supply should reserve a margin of 20% (it is recommended to use only 80% of the power) to ensure sufﬁcient voltage to drive the product. · Please operate carefully, do not touch the AC power terminal when the power is on to prevent electric shock. · Pay attention to the positive and negative poles of the power cord, and do not connect...

Open the catalog to page 11

All COLORS LIGHTING catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list