PDS-60 24 V Versatile power/data supply for indoor and outdoor applications Product Guide

Versatile power/data supply for indoor and outdoor applications PDS-60 24 V Pre-programmed is a versatile power/data supply designed for indoor and outdoor LED lighting installations using Color Kinetics luminaires.

Take a closer look • PDS-60 24 V accommodates input voltages ranging from 100 VAC to 240 VAC. Short-circuit protection prevents device failure due to incorrectly wired luminaires. • Features a NEMA 4 (IP66) enclosure, PDS-60 24 V installs in dry, damp, and wet locations. • PDS-60 24 V DMX/Ethernet is compatible with both DMX and Ethernet controllers. • PDS-60 24 V Pre-programmed features built-in visual effects, allowing configurations without a separate controller. • PDS-60 24 V offers multiple standard-size conduit entries to accommodate 1/2 in and 3/4 in US tradesized conduit. • PDS-60 24...

Specifications and information Due to continuous improvements and innovations, specifications may change without notice. General information Electrical Input Voltage Power Consumption Power Output Fuse Rating (2) 4 A, 5 x 20 fast blow fuses Connections Threaded Openings Data Input Source PDS-60 24 V DMX/Ethernet § PDS-60 24 V Pre-Programmed (Internal) Data Output RJ-45 input and output connectors (PDS-60 24 V DMX/Ethernet only) Power Input Line-neutral-ground cable, flying leads Power Output Physical Dimensions (Height x Width x Depth) Cast aluminium enclosure Powder-coated gray matte Slots for...

mounting slots Sized for 13 mm (1/2 in ) trade size conduit Sized for 19 mm (3/4 in) trade size conduit Part Numbers PDS-60 24 V DMX/Ethernet PDS-60 24 V Pre-programmed Use Item Number when ordering in North America. Item Number PDS-60 24 V details including Installation Instructions, Specification Sheets, and product drawings, can be found at: www.colorkinetics.com/global/products/pds/pds60 PDS-60 24 V Power/Data Supply PDS-60 24 V Product Guide

Multi-language installation instructions can be found at: www.colorkinetics.com/global/products/pds/pds60 Installation PDS-60 24 V is a power/data supply designed for indoor and outdoor DMX and Ethernet lighting installations. PDS-60 24 V supplies power and data to low-voltage luminaires from Color Kinetics and delivers 62 watts of low-voltage output via two ports. It features a NEMA 4 (IP66) enclosure, allowing for installation in dry, damp, and wet locations. It automatically accommodates input voltages ranging from 100 VAC to 240 VAC. Owner / User Responsibilities It is the responsibility...

In an Ethernet environment, each Color Kinetics power/ data supply has a unique IP address. Each luminaire connected to the device is automatically assigned unique identifiers that controllers use to identify and manage each luminaire. Maximum data cable lengths are 100 m (328 ft) between Ethernet devices without a repeater. Ethernet maximum data run length Power/ Data Supply Ethernet Controller When installing in damp or wet locations, seal all points of possible moisture ingress with electronics-grade RTV silicone sealant so that water or moisture cannot enter or accumulate. Assemble Additional...

Configuration QuickPlay Pro 2 enables discovery, configuration, testing and demonstration of all luminaires and devices, including sPDS-480ca Control Modules, on your lighting network. You can commission PDS-60 24 V devices using QuickPlay Pro 2 software. Automatically discover luminaires, PDS-60 24 V devices, and power supplies using QuickPlay Pro 2 with a computer connected to your lighting network. The Quick Start Guide is a comprehensive guide to help you start using QuickPlay Pro 2. It contains everything from Device Configuration through to Live Demonstration. Updating Firmware PDS-60 24...

Power Indicators (All Devices) Both versions of the PDS-60 24 V have two power indicators, one for each luminaire port. If a port fails for any reason (for instance, if a fuse blows), the red indicator light will be off. Indicator OUT 1 PDS-60 24 V Ethernet/DMX The PDS-60 24 V Ethernet/DMX power/data supply listens for data on both the DMX and Ethernet input ports. When a valid connection is detected, PDS-60 24 V Ethernet/DMX switches to the appropriate mode. Three indicator lights show the mode (Ethernet or DMX) and if applicable, the status of the Ethernet connection: Status Indicators Each...

Display Light Effects Pre-Programmed PDS-60 24 V If you have the pre-programmed version of the PDS-60 24 V, you are able to display effects on your luminaires without a controller. Pre-programmed devices cannot receive signals from external controllers, but they can send light show data to other downstream DMX-based power/data supplies via the DMX OUT port. This means PDS-60 24 V Pre-Programmed devices can effectively play the role of controllers. (Refer to the Make Data Input Connections section for instructions on how to link power/data supplies via DMX OUT ports.) To achieve the effects you...

© 2023 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. All trademarks are owned by Signify Holding or their respective owners. Cover photography credits: Signify DAS-000059-00 R02 www.colorkinetics.com...