1. Catalogs
  2. COLGED
  3. SteelTech 38

SteelTech 38

SteelTech 38
1 / 16 PagesView full catalog

SteelTech 38

Product catalog summary
Introduction
Colged dishwashers are designed for industrial use, focusing on efficiently washing large quantities of dishes. The document discusses both theoretical and practical productivity, emphasizing factors that affect performance.
Theoretical vs. Practical Productivity
Theoretical productivity refers to the maximum number of racks a dishwasher can process per hour based on the shortest wash cycle, often cited in sales materials. Practical productivity accounts for recovery time needed for the boiler to heat water, providing a more realistic performance measure.
Colged Productivity
Colged dishwashers are engineered to maximize real-life productivity, offering 45 to 50 racks per hour. Technologies like QuickReady and electrical power division systems enhance efficiency by reducing water consumption and optimizing recovery time.
Programmes and Flexibility
Colged dishwashers offer various standard and specialized programmes, such as ProSpeed for light soiling and ProSan for sanitization, along with self-cleaning programmes for easier maintenance.
Cost Efficiency
These dishwashers are cost-effective, with low water and energy consumption. Operating costs for washing 1800 plates range from 5.29 to 6.46 €, depending on the model. Technologies like HiTech spray arms and UltraRinse3 geometry significantly reduce water usage.
Technological Innovations
Advanced technologies such as the HiTech arm and DuoFlo pump enhance washing efficiency and reduce power consumption. The HotWash system maintains higher tank temperatures for improved washing results.
Water Treatment Systems
Colged offers built-in and external water softeners, decarbonation systems, and reverse osmosis filtration to ensure optimal water quality, especially beneficial for glassware and cutlery.
Rinsing Systems
Various rinsing systems maintain consistent rinse temperatures and water consumption, with the ProRinse system achieving the lowest consumption at 1.6 litres per cycle.
Overview of Dishwashing Systems
The document details advanced dishwashing systems, focusing on ArchiMedes and EvoLution3 technologies, which enhance water efficiency and cleanliness.
ArchiMedes System
This patented system improves water drainage efficiency from 66% to 83% by ensuring the dirtiest water is drained first, reducing water and detergent usage.
EvoLution3 System
Features a 3-stage filtration process with mesh sizes down to 0.8 mm, achieving 100% water changeover efficiency.
NRG Heat Recovery System
This system captures steam to preheat incoming water, saving energy and reducing emissions, with potential savings of up to 4.2 kWh daily.
TopTech Series 39
Combines plate and utensil washing capabilities, offering high productivity and flexibility with multiple programs and advanced user interfaces.
Construction and User Interface
Dishwashers feature full double-skin construction for insulation and a user interface with a backlit LCD display that changes color based on machine status.
Technical Specifications
Includes dimensions, power consumption, and water supply requirements, designed for high productivity with features like electronically controlled dosing units.
Conclusion
The document highlights Colged's technological advancements in dishwashing systems, emphasizing efficiency, flexibility, and user-friendly operation.
Overview of IsyTech and SteelTech Ranges
The document provides specifications and features of the IsyTech and SteelTech dishwasher ranges, highlighting simplicity of use and variety of wash programs.
Programme Selection
Both ranges offer multiple wash programs, with IsyTech including self-cleaning programs and SteelTech featuring automatic drainage.
Technologies
Key technologies include DuoFlow pump, UltraRinse3 rinse arm, HiTech wash arms, and EnergySaving system, with additional features like QuickReady and ProDose available in select models.
Characteristics
Dishwashers feature double-skin construction, press-moulded tanks, and electronically controlled dosing units, with integral tank filters.
Technical Data
Both ranges have a maximum real productivity of 45 racks per hour and a theoretical productivity of 60 racks per hour, with specific dimensions and power specifications.
Construction and User Interface
Designed for ease of use with a full double-skin lower body and a user interface with function keys and an LED display.
Standard Equipment
Each dishwasher includes a plate rack, flat rack, cutlery container, and hoses.
Disclaimer
Performance data is based on ideal conditions and may vary with installation conditions. Technical data is for guidance and may change with technological advancements.
See more

Catalog excerpts

SteelTech 38-2

Maximum theoretical productivity with a rinse temperature of 80°C and water supply temperature of 15°C (racks/hour) Water consumption in litres per cycle Boiler heating element power in kW - power consumption < 16 amp Boiler heating element power in kW - power consumption > 16 amp Anyone purchasing an industrial dishwasher has a specific purpose: TO WASH LARGE QUANTITIES OF DISHES IN THE SHORTEST POSSIBLE TIME. When you choose a machine and consult the sales brochures of various manufacturers, you will see that the figure most often quoted is the Theoretical productivity This value does not...

 Open the catalog to page 2
SteelTech 38-3

Space is a valuable resource in any kitchen, and this is why Colged has created truly multifunctional dishwashers that are able to fulfil a variety of very different functions as the need arises. All our under-counter machines have three standard programmes for dishes, up to three programmes for self-cleaning and tank water changing and up to seven specialised programmes. All machines offer the automatic start function, where the cycle is started simply by lowering the hood. Standard programmes Differ not only for their contact time (cycle duration), but also for their wash and rinse temperatures...

 Open the catalog to page 3
SteelTech 38-4

Easy cleaning Colged dishwashers are constructed in accordance with the TotalClean design philosophy to make end-of-shift cleaning operations as quick and easy as possible. This entails a number of important design features: Construction No pipes inside the wash chambers, stainless steel rack guides, unblockable integral surface strainers, with 2.5 mm diameter mesh and dish-shaped to trap dirt during emptying. The hood is constructed with three movable sides and one fixed so as to convey the vapour towards the rear, thereby ensuring that the operator is not engulfed in a cloud of steam when the...

 Open the catalog to page 4
SteelTech 38-5

The Technologies Water distribution system Washing system The main component is the HiTech arm made from a composite material called ProComposit (30% fibreglass, 30% talcum microparticles, 40% organic resin). During rinsing, patented UltraRinse3 geometry ensures that the water is used more effectively and efficiently, thereby helping to minimise consumption. The washing nozzles are at the same level as the rinse nozzles; this means that the spray is not obstructed, as is the case with the normal arrangement of separate wash and rinse arms. The arm rotates on 3 graphite bearings which reduce friction...

 Open the catalog to page 5
SteelTech 38-6

The Technologies Rinse systems Filtration systems Water treatment systems Colged dishwashers employ a number of different rinsing systems, with different levels of complexity and performance, each of which however is capable of ensuring that certain parameters remain constant: Timed rinse: uses ThermoStop to ensure a constant temperature at the start of the rinse cycle; the duration of the cycle is fixed, while the water consumption level depends greatly on the pressure of the mains water supply. It is used on the models 38-00 -10 -20. The minimum water consumption is 2 litres/cycle. Volumetric...

 Open the catalog to page 6
SteelTech 38-7

NRG heat recovery system At the end of the wash cycle, the steam in the wash chamber is aspirated through two vents in the back panel and directed to a heat exchanger made from copper and aluminium (or optional stainless steel for machines supplied with osmosis water) where the steam gives up its latent heat of evaporation to the cold water coming from the mains, which is then sent to the boiler. The steam condenses and is expelled, while the temperature of the cold water rises by approximately 20°C. The entire process takes only 30”, which must therefore be added to the standard duration of...

 Open the catalog to page 7
SteelTech 38-8

The TopTech serie 39 The flagship of the Colged range. Characterised by their rack size of 60 x 50 cm, these models are extremely technically advanced, with an excellent build quality and feature innovative technologies that offer the very best in terms of productivity, low consumption and easy operation. Operational flexibility is also of the highest level, thanks to a wide range of programmes, with, depending on the version, up to three standard programmes and eight specialised programmes, all of which can be easily selected from the direct access menu. Why to choose a TopTech series 39 This...

 Open the catalog to page 8
SteelTech 38-9

Water supply temp. 15°C, Rack loading and unloading time 10”

 Open the catalog to page 9
SteelTech 38-10

PROGRAMME SELECTION The TopTech serie 38 The top models in the Colged range are extremely technically advanced, with an excellent build quality and feature innovative technologies to offer the very best in terms of productivity, low consumption figures and easy operation. Operational flexibility is also of the highest level, thanks to a wide range of programmes, with, depending on the version, up to three standard programmes and eight specialised programmes, all of which can be easily selected from the direct access menu. Construction Full double-skin construction with thermally-acoustically...

 Open the catalog to page 10
SteelTech 38-11

Water supply temp. 15°C

 Open the catalog to page 11
SteelTech 38-12

The IsyTech range This product family is characterised by its double-skin construction, technical solutions and advanced functions,with operational flexibility ensured by three standard programmes and four special programmes organised into two direct access menus. Construction Full double-skin construction with thermally-acoustically insulated hood. The hood lifts smoothly and easily with no tight spots, thereby reducing operator fatigue. The hood opening of 45 cm is among the highest of products in this market segment. The tank is entirely press-moulded and free of welds and sharp edges; it...

 Open the catalog to page 12
SteelTech 38-13

* Water supply temp. 15°C, Rack loading and unloading time 10”

 Open the catalog to page 13
SteelTech 38-14

The SteelTech range This product family is characterised by its extreme simplicity of use, while still offering a wide choice of wash programmes and additional functions. Construction Full double-skin construction for the lower body and single-skin for the hood. The hood lifts smoothly and easily with no tight spots, thereby reducing operator fatigue. The hood opening of 45 cm is among the highest of products in this market segment. The tank is entirely press-moulded and free of welds and sharp edges; it is equipped with a full-width integral surface filter, which, thanks to its large intake...

 Open the catalog to page 14

All COLGED catalogs and technical brochures

  1. Utensil washer

    12  Pages

  2. Glasswashers

    12  Pages

  3. NeoTech 901

    12  Pages

  4. IsyTech 31-10.1

    24  Pages

  5. SteelTech 33

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.