Group: Felix Distribution
Catalog excerpts
UNIVERSAL CLIP
Open the catalog to page 1High tensile strength Absorbs wood composite movement Fixing on wood and aluminium joists Compatible with reversible blades (from 20 to 26 mm x 150 mm max.)
Open the catalog to page 2HYBRID 8-18, A BI-MATERIAL CLIP Exclusive & Innovative Factory-fitted stainless steel screws on the clip for quick and easy installation. Torx grip for comfort and precision Claw clip: 6 claws, 3 on each side to firmly hold the blade. AISI 304 stainless steel fin, 30 mm wide for optimum support and 1.20 mm thick, with matt black anti-reflective lacquer finish Honeycomb structure absorbs the movements of the wood composite Black UV-resistant polypropylene body, 6mm wide, ensuring an appropriate and consistent spacing between the blades Self-drilling point for fixing in wood or aluminium...
Open the catalog to page 3Ideal for installation composite decking HYBRID 8-18 S AND M CLIP SCREWS Screw characteristics • AISI410 stainless steel screws 4.2 x 27 mm size S and 35 mm size M • Borrow Torx TX15 • Self-drilling tip • Drilling capacity in aluminium: 3 mm • Drilling in hardwood with a density of up to 800 kg/m3 • Reduced 6 mm diameter head • Black lacquer 3,5 mm 6 mm HYBRID CLIP SCREWS 8-18 L Screw characteristics • 4.8 x 43 mm AISI410 stainless steel screws • Borrow Torx TX20 • Self-drilling tip • Drilling capacity in aluminium: 4 mm • Drilling in hardwood with a density of up to 900 kg/m3 • Reduced 6...
Open the catalog to page 4Installation & benefits Cobra Airspacer promotes ventilation between the board and the joist without affecting the action of the fixing clip or the movement of the wood. Its customised design fits perfectly under the honeycomb base of the Cobra Hybrid clips for quick and easy installation. The Airspacer shim helps to limit the shearing effect on the fixing screw. 8 mm
Open the catalog to page 51. Fitting the Start/End clip, then laying the first board 2. Fit the Hybrid clip, claw side down, into the groove, then fit the next board, curved side down, up to the clip wedge. 3. Screw on the clip, holding the blade in place. Tap the blade with a mallet to ensure it is correctly inserted. 4. Repeat the operation until you reach the last blade and finish with the final start/end clip. 3 The use of clamps is recommended for optimal and rapid screwing of Hybrid clips. Installation rules 400 mm mm max 400 max Double joisting at the ends of the boards
Open the catalog to page 62. SPREAD THE CLIPS AT THE ENDS *Rating with a 40mm centre to centre joists distance
Open the catalog to page 7All Cobrafastener catalogs and technical brochures
-
WEDGES
1 Pages
-
GEOTEXTILE FELT
1 Pages
-
COBRA® BITUDECK & PROTAPE
1 Pages
-
DRILLING / MILLING BIT
1 Pages
-
COBRA® DECKSPACERS
1 Pages
-
COBRA® AIRSPACER
1 Pages
-
HYBRID 8-25
8 Pages
-
HYBRID 7-22
7 Pages
-
SPIRAL® FOUNDATION SCREW
13 Pages
-
NIVO® PEDESTALS
2 Pages
-
Cobra Fastener Catalog 2024
40 Pages