HYBRID 7-22
7Pages

UNIVERSAL CLIP

High tensile strength Absorbs decking movements Fixing on wood and ALUMINIUM joists Compatible with reversible blades

HYBRID 7-22, A BI-MATERIAL CLIP Exclusive & Innovative Stainless steel AISI 304 fin: 30 mm wide for optimal retention and 1.2 mm thick, matte black lacquered for anti-glare Factory-fitted stainless steel screws on the clip for quick and easy installation. Torx grip for comfort and precision Asymmetrical clip: one side with 3 claws to hold the blade firmly, a curved side for easy positioning of the next board and allows the wood to expand Honeycomb structure absorbs deck movements Black UV-resistant polypropylene body, 6mm wide, ensuring an appropriate and consistent spacing between the...

Ideal for installation bamboo decking HYBRID 7-22 S AND M CLIP SCREWS Screw characteristics • AISI410 stainless steel screws 4.2 x 27 mm size S and 35 mm size M • Borrow Torx TX15 • Self-drilling tip • Drilling capacity in aluminium: 3 mm • Drilling in hardwood with a density of up to 800 kg/m3 • Reduced 6 mm diameter head • Black lacquer 3,5 mm 6 mm HYBRID CLIP SCREWS 7-22 L Screw characteristics • 4.8 x 43 mm AISI410 stainless steel screws • Borrow Torx TX20 • Self-drilling tip • Drilling capacity in aluminium: 4 mm • Drilling in hardwood with a density of up to 900 kg/m3 • Reduced 6 mm...

Installation & benefits Cobra Airspacer promotes ventilation between the board and the joist without affecting the action of the fixing clip or the movement of the wood. Its customised design fits perfectly under the honeycomb base of the Cobra Hybrid clips for quick and easy installation. The Airspacer shim helps to limit the shearing effect on the fixing screw. 7 mm

1. Fitting the Start/End clip, then laying the first board 2. Fit the Hybrid clip, claw side down, into the groove, then fit the next board, curved side down, up to the clip wedge. 3. Screw on the clip, holding the blade in place. Tap the blade with a mallet to ensure it is correctly inserted. 4. Repeat the operation until you reach the last blade and finish with the final start/end clip. 3 The use of clamps is recommended for optimal and rapid screwing of Hybrid clips. Installation rules 400 mm mm max 400 max Double joisting at the ends of the boards

2. Spread the clips at the ends *Rating with a 40mm centre to centre joists distance