The importance of choosing well clay roof tile .5 45 Colour: MAGMA

clay roof tile onda Colour: MAGMA Weatherproof and perfect fitting Its deep interlock ensures resistance to weather lightness and easy fixing, making of the Logica an easy and safe tile Subject to specific conditions (see next page) State-of-the-art technology: Manufactured in individual H-cassette supports with plaster moulds and selected clays, tolerating the highest kiln temperatures. Top of the range aesthetics Traditional visual break between two rounded barrel tiles, contrast with its pure lines and fine surface finishing. Regulation: Installation regulation: Impermeability test: Fire resistance:...

MAGMA Clay roof tiles are natural products therefore small variations in colour might occur as a result of the production process. The printing process of this catalogue does not guarantee that printed colours will accurately match to actual roof tile colours.

1 mm = 0.03937 inches - 1 square metre = 10.764 square feet - 1 kg = 2.2046 lbs. Universal ridge Right verge Left verge Universal verge Weight per unit (kg): 2.50 Un./lm: 2.75 Weight per unit (kg): 3.30 2.6 Un./lm: Weight per unit (kg): 3.30 Un./lm: 2.6 Weight per unit (kg): 3.00 Un./lm: 2.5 Eaves tile Half tile Double tile Bird stop Ventilation tile Lanterne base tile Weight per unit (kg): 4.80 ∅ internal (mm) 125 The dimensions and weights are provided as a guideline. Tejas Cobert recommends on-site control and verification for all its products. Roofing components recommended for dry installation...

technical specifications Double lap, double interlocking Straight bond 45.5 x 28.9 Red base 45.3 x 28.9 Full colour coverage base The figures in this document are nominal and comply with regulatory tolerances. 1 mm = 0.03937 inches - 1 square metre = 10.764 square feet - 1 kg = 2.2046 lbs. HIGHEST BREAKING STRENGTH MAXIMUM IMPERMEABILITY H-CASSETTE PRODUCTION (INDIVIDUAL SUPPORTS) PLASTER MOULDS Tejas Cobert reserves the right to change the dimensions, weights and units per pallet of its products without prior notice. For further information, check the updated technical features in www.tejascobert.com...

technical information For questions related to local regulations, please contact your distributor. Areas of application Bearing in mind the height, force of dominant winds, rainfall indices and frequency of storms, Spain can be divided into three climate areas, as shown on the map. In addition to these three areas, it is necessary to consider the climatic conditions related to the specific site locations. We can differeciate up to three types of location in each area. • Protected location: Depression surrounded by valleys, protected from dominant or strong winds. • Normal location: Flat land...