Klinker K2
6Pages

The importance of choosing well clay roof tile Colour: MISTRAL Maximum flexibility

clay roof tile klinker K2 Klinker quality Double fitting to ensure tightness Ceramic tile made from special clay which when cooked at high temperature, it closes its porosity in such a way that it makes possible the Klinker material: • With high mechanical strength. • Unchanging against the ice and harsh environmental conditions. Subject to specific conditions (see next page) Adaptable to any roof geometry Wide longitudinal and transverse installation set, which makes it ideal for rehabilitation. Colour: CADAQUÉS Regulation: Installation regulation: (1) The certified characteristics by the...

VIEJO CASTILLA Clay roof tiles are natural products therefore small variations in colour might occur as a result of the production process. The printing process of this catalogue does not guarantee that printed colours will accurately match to actual roof tile colours.

Universal ridge Right verge Left verge Universal verge Weight per unit (kg): 3,20 Un./lm: 2,75 Weight per unit (kg): 2,80 Un./lm: 2,63 Weight per unit (kg): 2,80 Un./lm: 2,63 Weight per unit (kg): 3,20 Un./lm: 2,7 Ventilation tile Half tile Lanterne base tile Weight per unit (kg): 4,70 ∅ internal (cm): 16,0 Bird stop Ornamental piece Right rondes Left rondes Weight per unit (kg): 2,80 Un./lm: 2,6 Weight per unit (kg): 2,80 Un./lm: 2,6 The dimensions and weights are provided as a guideline. The compliance verification parameters for the certification requirements comply with the...

technical specifications Type: Double lap, double interlocking Straight bond Colour: VIEJO CASTILLA The figures in this document are nominal and comply with regulatory tolerances. 1 cm = 0.3937 inches - 1 square metre = 10.764 square feet - 1 kg = 2.2046 lbs. Tejas Cobert reserves the right to change the dimensions, weights and units per pallet of its products without prior notice. For further information, check the updated technical features in www.tejascobert.com or contact Customer Support Service. MAXIMUM IMPERMEABILITY HIGHEST BREAKING STRENGTH H-CASSETTE PRODUCTION (INDIVIDUAL...

technical information For questions related to local regulations, please contact your distributor. Areas of application Taking into account the altitude, the force of the prevailing winds, rainfall rates and frequency of storms, three basic climatic zones can be considered: Zone 1: interior areas with levels lower than 200 m altitude. Zone 2: interior areas with levels up to 500 m altitude and sea bordering areas. Zone 3: mountain and high mountain areas, as well as ocean-bordering areas. Besides these three areas, it should be considered the climatological effects which may result from the...