The importance of choosing well clay roof tile Colour: PLATEA Tradition & variety

clay roof tile cazorla Maximum leak-proofing Due to its large water guiding area. Easy to install For its rear set back profile. Subject to specific conditions (see next page) The most tried roof tile in the market With over 150 million units installed. Colour: PLATEA Regulation: Installation regulation: N AENOR EN 1304 MIAMI DADE (1) It fulfills the characteristics of the Brand NF with complementary option “mountain climate”. The certified characteristics by the Brand NF Clay roofing tiles are the appearance, the geometric characteristics, flexural strength, impermeability and frost resistance...

ARENA OCRE Clay roof tiles are natural products therefore small variations in colour might occur as a result of the production process. The printing process of this catalogue does not guarantee that printed colours will accurately match to actual roof tile colours.

1 mm = 0.03937 inches - 1 square metre = 10.764 square feet - 1 kg = 2.2046 lbs. Classic ridge Right verge Left verge Universal verge Weight per unit (kg): 3.10 Un./lm: 2.5 Weight per unit (kg): 3.40 Un./lm: 2.5 Weight per unit (kg): 3.40 Un./lm: 2.5 Weight per unit (kg): 3.10 Un./lm: 2.4 Classic 3 ridge junction Half tile Ventilation tile Lanterne base tile Weight per unit (kg): 4.30 ∅ internal (mm): 120 The dimensions and weights are provided as a guideline. The compliance verification parameters for the certification requirements comply with the compatibility procedures for the corresponding...

technical specifications Type: Double lap, double interlocking Straight bond The figures in this document are nominal and comply with regulatory tolerances. 1 mm = 0.03937 inches - 1 square metre = 10.764 square feet - 1 kg = 2.2046 lbs. Tejas Cobert reserves the right to change the dimensions, weights and units per pallet of its products without prior notice. For further information, check the updated technical features in www.tejascobert.com or contact Customer Support Service. MAXIMUM IMPERMEABILITY HIGHEST BREAKING STRENGTH Commercial Guarantee Our tiles are guaranteed for a period, starting...

technical information For questions related to local regulations, please contact your distributor. Areas of application Bearing in mind the height, force of dominant winds, rainfall indices and frequency of storms, Spain can be divided into three climate areas, as shown on the map. In addition to these three areas, it is necessary to consider the climatic conditions related to the specific site locations. We can differeciate up to three types of location in each area. • Protected location: Depression surrounded by valleys, protected from dominant or strong winds. • Normal location: Flat land...