Exhibit with us
*myarchiexpo  
English
  1. Catalogs
  2. CM Srl
  3. Mixing bucket MIX
video corpo

Mixing bucket MIX

Mixing bucket MIX
1 / 2 PagesView full catalog

Mixing bucket MIX

Product catalog summary
Overview: The MIX Mixing Bucket is designed for efficient concrete mixing in various conditions, with capacities ranging from 160 to 1300 liters. It is suitable for use in construction, demolition, recycling, and agricultural sectors.
Specifications:
  • Available models: MIX 160, 220, 250, 300, 350, 500, 650, 800, 1000, 1300.
  • Useful width ranges from 800 mm to 2200 mm.
  • Rated capacity varies from 160 liters to 1300 liters, with maximum capacities slightly higher.
  • Void weight ranges from 200 kg to 1130 kg.
  • Oil flow requirements range from 20-30 l/min to 150-200 l/min, depending on the model.
  • Pressure requirements range from 150 bar to 200 bar.
  • Dimensions vary by model, with the largest being 1400 x 2500 x H 1300 mm.
Strengths:
  • Equipped with a 12/24 Volt electric valve for hydraulic mouth opening.
  • Constructed with anti-wear materials for durability.
  • Engine withstands up to 350 bar pressure.
  • Features include double internal support of motor shaft, chain tensioning rod, and chain transmission.
  • Hydraulic mouth for discharge and standard hose for concrete discharge.
  • Easy maintenance.
Optional Features:
  • Interchangeable bolted bottom and cochlea.
  • Hydraulic grid opening and connector options.
  • Pre-arrangement for various machinery including excavators and tractors.
  • Interchangeable bolted upper bracket.
Applications: Suitable for use in canalization, subsoil work, demolitions, construction, tunnel work, agricultural and forest maintenance, recycling, quarries, mines, and street work.
Note: Weights and dimensions may vary without notice, and weight does not include the coupler.
See more

Catalog excerpts

Mixing bucket MIX-2

MIXING BUCKET It can mix concrete in any condition and in a short time. Produced from 160 up to 1300 lt. OPTIONAL - Interchangeable bolted bottom - Interchangeable bolted cochlea - Hydraulic grid opening - Pre-arrangement for excavator / backhoe / wheel loader / telescopic handler / tractor - Interchangeable bolted upper bracket STRENGTHS - 12/24 Volt electric valve for hydraulic mouth opening - Cutting edge, shoulders, bottom and propeller in anti-wear material - Engine resistant up to 350 bar - Double internal support of motor shaft - Chain tensioning rod - Chain transmission - Supporting foot...

 Open the catalog to page 2

All CM Srl catalogs and technical brochures

  1. CBF-L SERIES
    CBF-L SERIES

    2  Pages

  2. Sweeping bucket CBS PROFI
    Sweeping bucket CBS PROFI

    2  Pages

  3. Cold planer for excavator FSE
    Cold planer for excavator FSE

    2  Pages

  4. Cold planer for skid steer loader FS
    Cold planer for skid steer loader FS

    2  Pages

  5. Electric Jaw crusher CR
    Electric Jaw crusher CR

    2  Pages

  6. Screening bucket CDS
    Screening bucket CDS

    2  Pages

  7. Vibrating plate compactor PV
    Vibrating plate compactor PV

    2  Pages

  8. Crusher bucket CBF
    Crusher bucket CBF

    2  Pages

  9. Buckey with gripper
    Buckey with gripper

    2  Pages

  10. Sweeping bucket CBS
    Sweeping bucket CBS

    2  Pages

  11. Sweeping bucket CSI
    Sweeping bucket CSI

    2  Pages

  12. Angle sweeper
    Angle sweeper

    2  Pages

  13. Screening bucket CBR
    Screening bucket CBR

    2  Pages

  14. Sweeping bucket Multi Kit CBS MK
    Sweeping bucket Multi Kit CBS MK

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.