*myarchiexpo

Catalogs
Clipsal
Spark-e-mate

Spark-e-mate

Product catalog summary

Overview: The Spark-e-mate is a multi-function electrical installation tester designed for ease of use and compliance with Australian and New Zealand standards. It simplifies the testing process for electrical installations, ensuring safety and efficiency.

Product Features:

Equipped with a three-pin plug for socket testing and optional test probes for lighting.
Bluetooth logging capability for faster test cycles and report storage.
Dimensions: 220mm x 110mm x 45mm with a tough rubber protective cover.
Optional three-phase adaptor for industrial applications.
Complies with AS/NZS standards including AS/NZS3017, AS/NZS3260, AS/NZS3100, AS/NZS3350.1, and AS/NZS61010.1 Category IV 600V.

Product Benefits:

Performs comprehensive electrical wiring tests relevant to AS/NZS3000 standards.
Ensures electrical installations are safe for use.
Reduces the need for multiple test equipment maintenance and calibration.
Bluetooth connectivity allows for easy storage and emailing of test reports.

Testing Capabilities:

Tests include Earth Continuity, Insulation Resistance, Polarity, Correct Circuit Connections, Earth Fault Loop Impedance, and Residual Current Device functionality.
Can test extension leads, power accessories, supply voltage, mains frequency, and three-phase circuits.

User Feedback: Users have reported significant time savings and efficiency improvements with the Spark-e-mate, particularly with the Bluetooth model.

Accessories: Optional accessories include a three-phase adaptor, test lead kit, and a shoulder bag.

Contact Information: For further inquiries, contact Schneider Electric in Australia or New Zealand through the provided phone numbers and email addresses.

Catalog excerpts

Electrical Installation Tester Electrical Tester

Open the catalog to page 1

Comprehensive electrical wiring tests Product Features Installation testing made easy • Three-pin plug for socket testing. Why waste your precious time finding the correct instrument to test installations? The Clipsal Spark-e-mate has you tested and covered. One instrument does it all! • Optional test probes for lighting (493L). • Optional Bluetooth logging. The Clipsal Spark-e-mate performs comprehensive electrical wiring tests relevant to Australian and New Zealand Standards from socket outlets to the switchboard. • Dimensions: 220mm x 110mm x 45mm. • Tough rubber protective cover. Recording...

Open the catalog to page 2

Save time, save money Clipsal’s Spark-e-mate can test for: Earth Continuity Is the Earth bonded to the Neutral properly? Is the Earthing conductor resistance low enough to permit the passage of current necessary to operate the over current protective device? Insulation Resistance Is the resistance between all live conductors and Earth as high as it should be? (Tested using 250V d.c. or 500V d.c. selectable). Polarity Is the Active and Neutral wired correctly? Are there no other transpositions? Correct Circuit Connections Is the Earth connected and at a safe potential? Earth Fault Loop Impedance...

Open the catalog to page 3

Electrical installation tester typical results Test Product Catalogue Numbers Catalogue No. Optional test probes Spark-e-mate with Bluetooth Spark-e-mate kit with Bluetooth and test leads Optional Test Lead Kit 493L Spark-e-mate Electrical Installation Tester 33-37 Port Wakefield Road, Gepps Cross, South Australia 5094 PO Box 132, Enfield Plaza, South Australia 5085 Telephone: (08) 8161 0511 Facsimile: (08) 8161 0900 Email: [email protected] Internet: www.clipsal.com National Customer Care Enquiries: National Customer Care Facsimile: International Enquiries International Sales and Marketing...

Open the catalog to page 4

Spark-e-mate

Spark-e-mate

Catalog excerpts

All Clipsal catalogs and technical brochures

Archived catalogs