Product Range and Formats

The document details the LEK collection of ceramic tiles by CLIPER Cerâmica, featuring multiple colors including Antracite, Cinza, Branco, Taupe, and Bege. Tile sizes are primarily 45x45 cm, 33x60 cm, and 60x60 cm, with thicknesses ranging from 0.78 cm to 0.95 cm. Both natural (Nat.) and rectified (Rect.) finishes are available.

Additional complementary products include skirting (rodapé/plinthe) and steps (degrau/marche d’escalier) in various sizes, finishes, and packaging quantities.

Technical Characteristics and Standards

The tiles conform to the EN 14411:2012 standard and ISO 10545 series for porcelain floor tiles. Key technical parameters include:

• Dimensional Tolerances: Width and length ±0.6% or ±2.0 mm; thickness ±5% or 0.5 mm; edge straightness ±0.5% or ±1.5 mm; rectangularity ±0.5% or ±2.0 mm; flatness (central and lateral curvature, diagonal warping) ±0.5% or ±2.0 mm.
• Surface Quality: At least 95% of tiles are free from defects.
• Water Absorption: Less than 0.5%, with a maximum of 0.6% for individual pieces.
• Breaking Strength: Minimum 700 N for tiles ≤7.5 mm thickness; minimum 1300 N for tiles ≥7.5 mm thickness; average values exceed these minima.
• Flexural Strength: Minimum 35 N/mm², with individual tiles not less than 32 N/mm²; average around 40 N/mm².
• Stain Resistance: Minimum Class 3 according to ISO 10545-14.
• Chemical Resistance: Tested product-by-product for acids, alkalis, household cleaning chemicals (minimum Class GB), and swimming pool salts (minimum Class GB).
• Frost Resistance: Required and guaranteed.
• Thermal Shock Resistance: Required and guaranteed.
• Surface Abrasion Resistance (PEI): Classified from III to V depending on the product.

Packing and Weight

Packaging details include pieces per box, approximate square meters per box, boxes per pallet, and weight per box and pallet. For example, 33x60 cm natural finish tiles come 6 pieces per box covering approximately 1.20 m², with 40 boxes per pallet.

Product Identification and Finishes

Tiles are identified by codes indicating size, color, finish, and rectification status (e.g., 3360LE52C04 S12). Finishes include natural (Nat.) and rectified (Rect.), with some decorated options (D...).

Additional Notes and Recommendations

• Due to the ceramic production process, slight color shade variations may occur compared to the standard color.
• CLIPER reserves the right to modify or discontinue any product or technical specification without prior notice.
• Printed colors in the catalog are indicative only and may not exactly represent the actual product.

Contact Information

CLIPER Cerâmica S.A.
Parque Industrial da Figueira da Foz, Rua das Olaias 119, 3090-463 Lavos - Figueira da Foz, Portugal
Phone: +351 233 402 200
Fax: +351 233 402 209
Email: [email protected]
Website: www.cliper.pt