TELEMACO WORK / TELEMACO DESK TELEMACO WORK design giulio manzoni/r&s clei Tilting single bed available in two sizes, with slatted base, vertical opening system, integrated or independent with a front table that tilts while the bed opens and takes place horizontally underneath the bed base. Opening and closing of the system is possible thanks to lateral hooks placed between bed base and vertical side panel . The bed leans on metal feet, coming out the bed frame during opening. TELEMACO DESK design giulio manzoni/r&s clei Tilting single bed available in two sizes, with slatted base, vertical opening system, integrated or independent with a front table that tilts while the bed opens and takes place horizontally underneath the bed base. Opening and closing of the system is possible thanks to lateral hooks placed between bed base and vertical side panel . The bed leans on metal feet, coming out the bed frame during opening. Dimensions: Closed 2200 x 1010 x 1525 mm / 86.6 x 39.8 x 60 inches Open 2200 x 1010 x 2142 mm / 86.6 x 39.8 x 83.3 inches Height of bed base from floor 307 mm / 12.1 inches Height of desk from floor 737 mm / 29 inches Mattress 1970 x 850 x 180 mm / 77.6 x 33.5 x 7.1 inches Dimensions: Closed 2200 x 1010 x 920 mm / 86.6 x 39.8 x 36.2 inches Open 2200 x 1010 x 2142 mm / 86.6 x 39.8 x 83.3 inches Height of bed base from floor 307 mm / 12.1 inches Height of desk from floor 737 mm / 29 inches Mattress 1970 x 850 x 180 mm / 77.6 x 33.5 x 7.1 inches TECHNICAL INFORMATION Opening mechanism of the bed throught gas springs. Structure in wood with adjustable feet in nylon. Bed base with frame in tubular reinforced iron and multilayer bent beech wood slats, fixed to the frame with nylon/rubber gaskets. Mattress: spring mattress, Reinforced Latex mattress, 50% Memory mattress. Mattress locking belts in nylon with fastener in black nylon Available Finishes: Melamine White Dover, Melamine Whited Oak or Gaphite Oak, Lacquer Clei colours system. The front panel is available as well in Wood Whited Oak or Graphite Oak and Glossy white Dialux. Back panel always in Melamine White REMARK - INSTALLATION AND SAFETY This model is supplied disassembled and its easy installation is supported by comprehensive instructions. It is compulsory to fix it to the wall, in 4 fixing points, using the proper hardware supplied by CLEI (squares, rawlplugs with diameter 9mm/0.4 inches and the couple nut-bolt) and following the assembling instructions provided together with the goods A plasterboard is not a suitable wall and the fixation can not be considered safe. (see assembling instructions) The installator is in charge to test the correct fixing and to provide a workmanlike installation The opening system is fixed to the structure with gears that remain perfectly tighten in both the day and the night positions. Maximum weight supported by the bed : kg. 200