ATOLL 000 / ATOLL 202 /SWING ATOLL 000 design giulio manzoni / pierluigi colombo / r&s clei Sofa is 245 cm wide, with sole seat cushion, storage space and cushions cm 60x 60 and cm 45 x 45 that lean against the rear stuffed shelf. It is integrated with a living wallpanel. Dimensions : Closed 2450 x 1250 x 2200 mm / 96.5 x 49.2 x 86.6 inches Open 2450 x 2200 x 1250-2200 mm / 96.5 x 49.2-86.6 inches Height of bed base from the floor 510 mm / 20.1 inches Height of sofa seat 400 mm / 15.7 inches ATOLL 202 design giulio manzoni / pierluigi colombo / r&s clei Corner sofa cm 281 x cm 220 , with storage space and cushions cm 60x 60 and cm 45 x 45 that lean against the rear stuffed shelf. It is integrated with a living wallpanel . The corner part tips up 45° to create space around the open bed in the night version. SWING design pierluigi colombo / r&s clei Sofa with one or two lateral armrests (second armrest is optional), ending part that slides in three different positions, reclining back rest, storage space underneath the sofa seat. It is integrated with a living wallpanel and it transforms into a double bed always ready to use provided with an innovative slatted base with aluminium frame and regulation system (bed base CF97) Dimensions : Closed 2200 x 2810 x 1250-2570 mm / 86.6 x 110.6 x 49.2-101.2 inches Open 2200 x 2810 x 2570 mm / 86.6 x 110.6 x 101.2 inches Height of bed base from the floor 510 mm / 20.1 inches Height of sofa seat 400 mm / 15.7 inches Dimensions : Closed 2200 x 2810 x 1250-1610-1750 mm / 86.6 x 110.6 x 49.2-63.4-68.9 inches Open 2200 x 2810 x 2200 mm / 86.6 x 110.6 x 86.6 inches Height of bed base from the floor 510 mm / 20 inches Height of sofa seat from the floor 370 mm / 14.6 inches Depth of the seat 600 mm / 23.6 inches

ATOLL 000 / ATOLL 202 / SWING TECHNICAL INFORMATION All the said models are provided with an innovative slatted bed base with anodized aluminium extruded frame and regulation system. The frame is integrated in the structure of the furniture and during opening and closing movements it slides on polyzene cams. Supports and joints are realized with proper moulds and fusions. The balancing system of the tilting mechanisms is provided with a safety stop device, without tie-rod nor spring at sight, since these are inserted in the frame with adjustable system and through specific devices, they remain...