MATERIAL SAFETY DATA SHEET TADELAKTPRO© Composite powder 1. 2. 3. 4. 5. 6. 7. Identification of the Substance/Preparation and Company Product name: TadelaktPro© powder Company address: ClayLime® sprl Avenue Monplaisir 77/89 BE-1030 BRUSSELS S+32(0)2 2424028 [email protected] Composition/Information on Ingredients: A lime preparation consisting: Clay Silica, Dolomite and granite 0-1.5mm particle size Mixture of 5 types of hydrated limes This product is a composition of blended lime powders. Hazard Identification: Classification: Irritant Human effects: dry powder has no effects on dry skin. When mixed with water, an alkaline solution is produced. A dust problem may occur in confined spaces. Environmental effects: no effects, blended powders are slightly soluble in water First Aid Measures: Skin contact: wash the affected areas with plenty of clean water. Eye contact: wash eyes immediately with plenty of clean water and if necessary, seek medical advice. Inhalation: if irritation occurs, move subject to fresh air. If nose or airways become inflamed, seek medical advice. Ingestion: do not induce vomiting. Wash out mouth with water and give plenty of water to drink. Move subject to fresh air. Fire Fighting Measures The substance is not flammable and does not support burning or dangerous synergetic reactions with other materials, provided that these substances themselves are stable. Accidental Release Measures: On spillage: Spilt material may be collected for re-use, provided that no contamination has occurred. Environmental precautions: Do not empty material into drain, sewers/water courses as substance hardens when in contact with water Storage and Handling: Storage conditions: store in dry conditions, preferably above ground on pallets protected by shrink-wrapping. Handling Procedures: Wear personal protective equipment and clothing to avoid contact with the skin and the eyes. Exposure controls and Personal Protection: Personal protective equipment: N/A Exposure limits : Total inhalable dust=10mg/m3/8 Respirable dust 4mg/m3/8h (occupational exposure standards) 9. Physical and Chemical Properties Physical state: Particulate Relative Density: approx. 2.5 Bulk density: 550-600 kg/m_ Fineness: <300 m Flammability: N/A Explosive Properties: N/A 10. Stability and Reactivity This material is considered stable. Conditions contributing to: Chemical instability: None Hazardous decomposition products: None Special precautions: None 11. Toxicological Information The material has no known toxic or carcinogenic effects 12. Ecological Information Stable in soil. No photo-degradation with sunlight. There may be an increase in pH when mixed with water. 13. Disposal Considerations Procedure: Dispose of empty bags or material at an authorized disposal site 14. Transport Information Not classified as hazardous for transport purposes. 15. Regulatory Information EEC Regulatory Information: None Packaging disposal according to the local disposal regulations 16. Other information This safety data sheet does not exempt the user from knowing and abiding by the legislation ruling his activity Disclaimer of Liability The information in this MSDS was obtained from sources we believe reliable; however, the information provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our controls and maybe beyond our knowledge. For this reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expensive arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS may not be acceptable. ClayLime sprl Avenue Monplaisir 77/89 BE-1030 BRUSSELS/BELGIUM www.claylime.com