Claystone© (bi-‐component) Lime-‐based coating CLAYLIME sprl Avenue Monplaisir, 77 BE 1030 BRUSSELS Belgium Complete, microporous and breathable system, composed of a dry mix of hydrated lime, micronized sedimentary rocks and pauzzolane which is mixed with a VOC-‐free JES010 polymer binder and a natural pigment selected from the ClayLime range. CREATINA's 30-‐colour chart offers natural pigments that have been tested and approved by ClayLime; the pigment packaging corresponds to the quantity needed for the 7 kg or 1.5 kg CREATINA kits. Since the mineral and natural pigments can vary slightly depending on production, the recommendation for larger surfaces is to mix together enough kits and pigments in order to avoid any colour difference during application. Decorative coating finish for interior floors, interior and exterior walls, bathrooms, furniture and work-‐ tops. Suitable for homes, hotels, shopping centres, showrooms, shops, restaurants... Kit for 12 to 14 m²: 7 kg powder + 3 litres of JES010 polymer Mini-‐Kit for 3 m²: 1.5 kg of powder + 0.5 litres of JES010 polymer Applied in 2 layers of +/-‐ 1mm each on any surface that is sturdy, smooth, clean, dry, grease-‐free, without cracks or vibrations, prepared and protected appropriately according to its purpose (see below). CREATINA is not cement-‐based and does not crack as long as the support and application meet the required criteria. Classification M1 on M1 support, M0 on M0 support. Behaviour, appearance Rheology-‐controlled coating with high-‐adhesion and high-‐resistance features + JES010 polymer binder to be mixed with the same quantity of water. White powder + creamy white liquid About 250gr/m² per layer . Equivalent to between 12 and 14 m²/kit of 7 kg + 3 litres JES010 on smooth and appropriate surface. The yield can vary depending on the application method and climatic conditions.

Surface preparation The support or surface needs to be solid, smooth, clean, completely dry, stable and free of vibrations, cracks, dust, grease and traces of any substance that might prevent the coating from adhering properly. The surface needs to be completely sturdy and unable to vibrate. The surface needs to absorb evenly. The materials used for shower surfaces and bath surrounds must meet the standards of resistance and sealing for these types of applications.The waterproofness of the wall supports must be ensured and guaranteed by a professional BEFORE the application of the CREATINA coating....