Hot water storage heaters and boiling water heaters

Hot water storage heaters Decentralised storage heaters provide conventional hot water supply. They store the hot water in a heat-insulated tank as close as possible to the point-of-use. They provide a limited amount of mixed water without long wait times. After dispensing the water, the storage tank automatically fills up again and heats the water to the set temperature. From 5 to 120 litres. 2 < Storage heater catalogue The size of the storage heater can be selected as required: e. g. small storage heaters are sufficient for single points-of-use (wash basins or sinks). The large wall-mounted...

Electric wall kettle K 5 Für den kleinen Bedarf: Kochendwassergerät K 5 zur bedarfsgerechten Heißwasserbereitung The electric wall kettle is mounted above the sink. It is used for demand-based hot water preparation at home or a work place. The user fills the unit with up to 5 litres of water and it is heated to the desired temperature etween b approx. 37 °C and the boiling point (99 °C). > Boiling water heater for hot water preparation from one cup up to 5 litres > Temperature range from approx. 37 °C to the boiling point (99 °C) > Integrated tap > Overflow drain integrated in the swivel spout...

Small storage heater Small storage water heater S 5 The small storage heater S 5 provides up to 5 litres of hot water for one point-of-use (e.g. the kitchen sink). To avoid exposing the unit to water line pressure, it requires a special open-outlet tap for vented hot water heaters. > Vented small 5-litre storage heaters for hot water supply at a single point-of-use > Temperature control approx. 35 °C to 85 °C with available energy-saver range and optional temperature limitation at 38 °C, 55 °C or 65 °C > Can only be used with a special open-outlet tap for vented hot water heaters > Safety temperature...

Would you like more? Small storage heater Small storage water heater S 10 Small storage water heater S 15 With its 10-litre capacity, this storage heater also fulfils an increased hot water demand at a kitchen sink. Due to its long-lasting copper tank, it allows for vented as well as un vented installation in combination with a safety assembly. > Unvented small 10-litre storage heater for hot water supply at one or two points-of-use > Corrosion-proof and therefore maintenance-free internal copper tank with high-quality heat insulation > Temperature control approx. 5 °C to 80 °C > For vented installation...

es. Wall-mounted storage heaters Wall-mounted storage heater S 30 The 30-litre wall-mounted storage heater S 30 fulfils the medium hot water demand. The high-quality hard foam insulation helps to minimise its energy use. > Unvented wall-mounted storage heater with 30-litres capacity for the hot water supply at one or more points-of-use > Internal tank with special enamel coating > Continuous temperature adjustment up to approx. 75 °C eaia > Corrosion protection due to special enamel coating and magnesium protection anode Energy efficiency class Part number: Content [litres]: Type; maximum operating...

The great all-round talent. Wall-mounted storage heaters Hot water storage heater S50, 80,100 Hot water storage heater SX 50, 80, 100, 120 Whenever larger water amounts are required, these wall-mounted storage heaters provide the necessary capacities. The special enamel coating and a magnesium anode provide corrosion protection for the internal tank. > Unvented wall-mounted storage heater with 50, 80 or 100 litres capacity > Continuous temperature adjustment up to approx. 70 °C with temperature display > Corrosion protection due to special enamel coating and magnesium protection anode The storage...

Accessories: Open-outlet taps Accessories: Safety assemblies Two-handle temperature control mixer tap with swivel spout 15.5 cm Undersink safety assembly with non-return valve, pressure reducer and flexible connecting hoses Open-outlet single-lever wall-mounted mixer tap for oversink installation with swivel spout 16 cm T-piece kit for installation of an additional tap Two-handle wall-mounted mixer tap with isolating valve, swivel spout 16 cm and flow control Oversink safety assembly (6 bar) SG: Part no. 4100-0011 Aerators for tap adapters, female and male threads (for small storage water heaters...

CLAGE GmbH Pirolweg 1 – 5 21337 Lüneburg Germany Phone: +49  4131  89 01-38 Fax: +49  4131  83 200 [email protected] www.clage.com Corporate movie Subject to technical changes, design changes and errors. All trademarks and brand names are the property of their respective owners. Copyright notice: © fotolia.com / h368k742 (S. 10) All other photos and illustrations: © CLAGE Reprints, including excerpts, forbidden without the prior written permission of the publisher