*myarchiexpo

Catalogs
A Cimenteira do Louro
CATALOGUE GÉNÉRAL 2020

CATALOGUE GÉNÉRAL 2020

Product catalog summary

Surface Preparation: The document outlines the importance of preparing the installation surface to support approximately 50 kg/m². Specific preparation methods are required for different surfaces:

Brick or Masonry: Level the surface, remove mortar residues, and apply a flexible C2T adhesive cement.
Weakened Surfaces: Sand and clean the surface, apply a primer, and in severe cases, use high-pressure water cleaning and fiberglass mesh.
Metal and Wood Walls: Cover with waterproof tar cloth and apply fiberglass mesh.
Mineral, Natural Stone, Stucco, and Plaster: Apply a primer to reduce water absorption and ensure surface consistency.
Painted or Varnished Surfaces: Remove paint or varnish, clean with water, level with adhesive cement, and apply tiles.
Reinforced Concrete: Remove grease layers using high-pressure water jets.
Interior Plaster Surfaces: Avoid Portland cement due to chemical incompatibility; use alternative adhesives.

Installation Recommendations: For optimal results, mix tiles from different boxes to achieve a harmonious effect. Ensure the surface is clean of chemicals that may affect adhesion. For outdoor applications, use capstones to prevent water infiltration. Use a notched trowel to apply C2T adhesive cement for perfect adhesion. Always use double gluing, starting from the bottom up, and ensure adhesive coverage on the tile's back is perpendicular to the surface glue.

Application Tips: Begin installation at corners to avoid adjustments later. Press tiles firmly with horizontal movements for proper adhesion. Regularly check alignment with a spirit level. Randomly lift tiles to ensure full adhesive contact. Immediately clean any adhesive residue from tile surfaces using a soft brush and water, avoiding detergents. For adjustments, cut tiles with a diamond disc or cutting table.

Cutting and Drilling: Use a cutting machine with water cooling and power greater than 1hp for large cuts. Smaller cuts can be made with a dry grinder. For drilling, use a diamond twist drill with the appropriate diameter.

Safety: Always use Personal Protective Equipment (PPE) such as gloves, protective footwear, glasses, and hearing protection during preparation and installation. Follow all manual handling recommendations.

Material Recommendations: Mix and match pieces from different boxes for the best visual results. Protect the pieces and avoid walking on the floor for the first 24 hours after installation. Use standard neutral detergents for daily maintenance.

Tile-Laying Joints: Joints are essential for proper application, aiding in alignment and correcting surface irregularities. They should match the tile color and be cleaned with sisal after the manufacturer's specified time.

Packaging and Waste Management: Dispose of cardboard and plastic packaging at designated recycling locations.

Regulations and Standards: This document serves as a guide. Ensure compliance with all local regulations and standards where the tiles are installed.

Mortars and Glues: Consider the type, surface, and purpose of the pieces when selecting adhesives. Use a 10mm notched trowel for maximum contact.

Application Procedure:

Use Class C2 flexible adhesive cement and follow the manufacturer's instructions.
Spread adhesive cement in a fine layer for uniform coverage and minor leveling corrections.
Use a notched trowel to work in small sections.
Apply adhesive on both the surface and the back of the tile.
Place tiles and tap with a white rubber mallet for optimal contact.
Regularly check the adhesiveness and avoid prolonged air exposure.
Occasionally lift tiles to ensure maximum contact.
Use spacers for uniform joints.
Remove adhesive residues before grouting.
Wait 24 to 48 hours before grouting, avoiding traffic during this period.

Joint Filling Recommendations:

Use 2 mm spacers for interior joints and 4 mm for exterior.
Respect expansion and control joints to accommodate dimensional variations.
Seal joints with a flexible mortar in the desired color.
Prepare the grout mixture as per manufacturer's instructions.
Apply grout diagonally to ensure full coverage and minimal contact with tile surfaces.
Clean excess grout immediately with a damp sponge, then wipe with a dry cloth.
Protect the floor with plastic sheeting after 24 hours to prevent contamination until project completion.
Use a surface waterproofing product for maintenance post-installation.

Ventilated and Thermal Systems: Innovative systems for installing reconstructed stone on surfaces prone to capillary moisture and for external thermal insulation of buildings using reconstructed stone. Components include cementitious substrate, ACL wall tiles, adhesive cement, joints, galvanized mesh, and thermal insulating EPS panels.

Application Advice: Various border and corner configurations are available for pool installations. Application methods include using sand and gravel layers for stability. Contact the provider for more information on application possibilities.

Specifications: Compacted soil is specified at 95% PM, indicating the level of soil compaction required. Drainage systems are mentioned, highlighting the importance of proper water management. The document specifies various measurements, such as spacing between pieces (5 to 10 mm) and other dimensions (3 to 6 mm).

Materials and Components: Studded green cover grids are used for certain applications, providing a structured surface for vegetation. Topsoil is referenced, indicating its use in landscaping or construction. Wall tiles and their packaging are discussed, noting that moisture retention can affect color intensity.

Procedures and Recommendations: After installing wall tiles, it is recommended to allow time for the color to settle, depending on environmental conditions. The application of products from the Block range is advised after floor installation to ensure protection and longevity.

Reference Constructions: The document lists numerous reference constructions, including highways, stadiums, shopping centers, and educational institutions, indicating the use of specified materials and techniques in these projects.

Standards and Norms: The document includes technical information and standards for various construction elements, such as curb stone beams and prefabricated panels. It also mentions the use of impregnators for waterproofing and protection of surfaces.

Contact Information: Contact details for application suggestions and further information are provided, emphasizing customer support and service.

Catalog excerpts

revestimentos wall tiles parements pierre Wandfliesen evolving towards design & innovation pavimentos floor tiles & pavers dallages Bodenfliesen & Platten outros produtos betao other concrete products outres produits de beton sonstige betonprodukte

Open the catalog to page 1

evolving towards design & innovation empresa enterprise company unternehmen S om o s um a m a rca p or tugue s a c om D NA for te e di nâ m i c o na á re a do s pav i m e nto s e reve s ti m e nto s e m b etã o. Te m o s um a for te l i ga çã o a o s a b e r té cni c o, de s i gn i nova dor, qua l i da de , p e r form a nc e e re s i s tê nci a do s no s s o s m ate ri a i s e s ol uç õ e s . Es ta m o s há m a i s de 4 0 a no s no m e rca do c om proj e cto s de a rqui tetura e de s i gn de i nte ri ore s de re fe rê nci a e m to do mundo. Em Por tuga l s om o s re s p ons áve i s p e l a s...

Open the catalog to page 2

Para nó s prote ge r o m e i o a m bi e nte nã o é um a te ndê nci a , é um a realidade obje c t i va . A ava l i a çã o e o c ontrol o s i s te m áti c o do s i m pa cto s ambientais das n o s s a s a cti v i da de s s ã o pre o cupa ç õ e s pri ori tá ri a s . Os pro duto s em b etã o s ã o c om p o s to s p or ci m e nto, a re i a , a gre ga do s e água, s endo 100 % re ci cl áve i s . Os no ss o s re sídu o s s ã o s e pa ra do s e e nv i a do s pa ra e nti da de s lic enc iadas para o e fe i to, s e ndo que c e rca de 9 9 , 9 % s e gue m pa ra s e re m re c ic lado s. O c onsumo de re curs...

Open the catalog to page 3

pavimentos floor tiles & pavers dallages bodenfliesen & platten acabamentos / finishings finitions / ausführungen _N n at u ral / n at u ra l n at u re l l e / n at ü r l i c h wall tiles parements pierre wandfliesen linha natural / nature line ligne nature / linie natur siena royal luna orion vénus marte teira nisa caster stone cork cementbrick ardos bergo linha design / design line ligne design / linie design marmobrick s marmobrick gr concrestrip riscado riscado plus cubus vértices hando hando plus prisma wave capitoné leaf madeira madeira piscina capeamento pedra tosca romano portucale portucale...

Open the catalog to page 4

revestimentos wall tiles parements pierre wandfliesen

Open the catalog to page 5

l i n h a n a t u r a l nature line ligne nature linie natur

Open the catalog to page 6

Por se tratar de elementos pré-moldados artesanalmente, o produto poderá apresentar ligeira variação de dimensões e tonalidades. Because these are handmade precast elements, the product may present a slight variation in dimensions. SN 01 Parce qu’il s’agit d’éléments pré-moulés á la main, le produit peut présenter une légère variation de dimensions. Die Produkte sind handgemacht. Die Abmessungen können daher leicht abweichen. thickness épaisseur Dicke pallet palette Palette pieces pièces Stücke weight poids Gewicht height hauteur Höhe width largeur Breite thickness épaisseur Dicke pallet palette...

Open the catalog to page 7

Por se tratar de elementos pré-moldados artesanalmente, o produto poderá apresentar ligeira variação de dimensões e tonalidades. Because these are handmade precast elements, the product may present a slight variation in dimensions. RY 0 1 Parce qu’il s’agit d’éléments pré-moulés á la main, le produit peut présenter une légère variation de dimensions. Die Produkte sind handgemacht. Die Abmessungen können daher leicht abweichen. cantos corner pieces c o in s e c k s t ü c ke width largeur Breite thickness épaisseur Dicke pallet palette Palette pieces pièces Stücke weight poids Gewicht height hauteur...

Open the catalog to page 12

Por se tratar de elementos pré-moldados artesanalmente, o produto poderá apresentar ligeira variação de dimensões e tonalidades. Because these are handmade precast elements, the product may present a slight variation in dimensions. Parce qu’il s’agit d’éléments pré-moulés á la main, le produit peut présenter une légère variation de dimensions. Die Produkte sind handgemacht. Die Abmessungen können daher leicht abweichen. LN 08 height hauteur Höhe width largeur Breite thickness épaisseur Dicke pallet palette Palette pieces pièces Stücke weight poids Gewicht height hauteur Höhe width largeur Breite...

Open the catalog to page 16

835 * Cl Por se tratar de elementos pre-moldados artesanalmente, o produto podera apresentar ligeira variagao de dimensoes e tonalidades. Because these are handmade precast elements, the product may present a slight variation in dimensions. Parce qu'il s'agit d'elements pre-moules a la main, le produit peut presenter une legere variation de dimensions. Die Produkte sind handgemacht. Die Abmessungen konnen daher leicht abweichen. elementos pianos flat elements elements plans flache stucke altura height hauteur Hohe 125 mm cantos corner pieces coins eckstucke int. 125 mm altura height hauteur Hohe...

Open the catalog to page 20

Por se tratar de elementos pré-moldados artesanalmente, o produto poderá apresentar ligeira variação de dimensões e tonalidades. Because these are handmade precast elements, the product may present a slight variation in dimensions. Parce qu’il s’agit d’éléments pré-moulés á la main, le produit peut présenter une légère variation de dimensions. Die Produkte sind handgemacht. Die Abmessungen können daher leicht abweichen. V 43 dimensions dimensions Abmessungen thickness épaisseur Dicke pallet palette Palette pieces pièces Stücke weight poids Gewicht Dimensões incluem junta de +/- 5% | Dimensions...

Open the catalog to page 23

CATALOGUE GÉNÉRAL 2020

CATALOGUE GÉNÉRAL 2020

Catalog excerpts

All A Cimenteira do Louro catalogs and technical brochures