The new standard N type MILLE series Low NOx burners Class 2 (< 120 mg/kWh), made in aluminum housing with a backward curved centrifugal impeller is studied and developed to get high performance and efficiency combined with low emissions. The performance range of this array of product goes from 2.550 to 13.000 kW and its modulating ratio is 1:3. Higher modulating ratio (up to 1:10) is available, upon request, in those models with mobile combustion head and electronic control unit. Back-pressure in combustion chamber (mbar)

TECHNICAL DETAILS Type N1060A N1300A Auxiliary electrical power supply Motor electrical power supply Noise level For the configuration of the gas train, see pages 116-117. AA RR FLANGIA BRUCIATORE BURNER FLANGE FORATURA CALDAIA CONSIGLIATA RECOMMENDED DRILLING TEMPLATE Suggested boiler drilling TIPO BRUCIATORE/ N1060A TYPE BURNER / MODELLO BRUCIATORE/ M-.MD.SR.IT.A.1.80MODEL BURNER / FORATURA CALDAIA CONSIGLIATA N RECOMMENDED DRILLING TEMPLATE TUTTI I DIRITTI SONO RISERVATI E PROPRIETA' DI CIB UNIGAS S.P.A. SENZA CONSENSO SCRITTO DI CIB UNIGAS S.P.A. QUESTO DISEGNO NON PUO' ESSERE RIPRODOTTO...

N1060A N1300A...SR mille SERIES N1060A PR-MD...SR Back-pressure in combustion chamber (mbar) Back-pressure in combustion chamber (mbar) DN80 Minimum inlet gas pressure (mbar) Minimum inlet gas pressure (mbar) Attention: the graph shows the value of the gas output (kW) against the corresponding pressure without the combustion chamber back pressure. To know the minimum gas pressure at gas train, in order to get the gas output, it is necessary to add the boiler back pressure to the value read on the curve.