Catalogs >
CIAT >
SANICIAT 2

SANICIAT 2
2Pages

Catalog excerpts

SANICIAT 2 SANICIAT 2 is a compact, packaged domestic hot water heater that operates in instantaneous, semi-instantaneous or storage mode. Designed for the collective housing, hotel, healthcare, industrial and service sectors, it is delivered ready for connection, and is intended for installation in mechanical rooms. Certified ACS (Certificate of Sanitary Conformity) and SANICIAT 2 is equipped as standard with an anti-legionella treatment system and is also available in an optional HEE (High Energy Efficiency) version. Firstly, SANICIAT 2 is set apart from the competition thanks to its very small footprint, which is the result of the integration of the new model of ITEX plate heat exchanger developed by CIAT. Particularly compact, it optimises heat transfer coefficients and enables the system to reduce its volume by around 15% compared to previous models. SANICIAT 2 is available in 23 sizes. It produces DHW flows at rates of up to 12.3 m³/h (55°C for a primary circuit temperature of 90°C). The DHW temperature can be adjusted to up to 65°C and the maximum allowable temperature for the primary circuit is 100°C. The maximum allowable pressure is 10 bar on the primary circuit and 7 bar on the DHW circuit. SANICIAT 2 is particularly easy to install. The water circuit comes supplied with standard couplings and there is no need to open the electrics box to connect the module to the power supply. Simply connect the 1.2 m cable with terminated ends extending from the electrics box. What is more, the module is delivered with blanking plates and protective netting on the threaded rods. As with the previous model, the SANICIAT 2 DHW module is equipped as standard with an anti-legionella treatment system. The controller features a setting that can be activated to establish the duration and frequency of treatment. The treatment causes a rapid rise in the temperature of the water in either the storage tank and the distribution loop or, in the case of models used in instantaneous mode, directly in the distribution loop.

Open the catalog to page 1

SANICIAT 2 features a new controller that is particularly easy to operate and set. Navigating through the front-panel interface is both very simple and completely intuitive. The clear-text display indicates information such as the date and time, the DHW setpoint temperature, the measured DHW temperature, the opening percentage of the three-way valve, etc. It is therefore easy to adjust a number of settings daytime and night-time setpoint temperatures, high and low temperature alarms, daily set-back temperature periods, anti-legionella treatment with customisable settings (frequency, times,...

Open the catalog to page 2