Vigil+ CA400 Control Unit
4Pages

{{requestButtons}}

Catalog excerpts

Vigil+ CA400 Control Unit - 1

INTRUDERPRODUCTRANGE Menu driven operation Each Chubb Vigil+ system can be individually configured to the user's exactrequirements.As the configuration data is held in solid state memory, installation time is reduced and changes can be quickly and efficiently made should the need arise.Operation of the system is controlled through Personal Identification Numbers(PIN) or a smartkey.Security is increased by introducing a time period during which a number remains valid.The engineer's PIN code is changed daily by Chubb Vigil+ using a complex algorithm ensuring that no unauthorised personnel can gain access to the system.The occurrence of false alarms is greatly reduced by using signal processing, where one detector refers to another for confirmation of an incident, and buffer areas that give a pre-warning should someone stray from the predetermined entry or exit route.A built in managed reset is available, which is designed to allow the customer toreset their own alarm system following a police called activation.This saves both time and money as an engineer will not have to go to site.The unit complies with ACPO, BS 4737 standards and the NACOSS code of practice. Chubb Vigil+ can be installed to meet with the requirements of BS 7042 high security standard.The benefits of Chubb Vigil+ are considerable, providing increased security andflexibility, through easy to use menu driven keypads installed at convenient locations within the building complex. Up to 8 zones,250 inputs,128 outputs Advanced PIN codesecurity Anti-false alarm signalprocessing Comprehensive timeschedules Optional managed resetfacility >

Open the catalog to page 1
Vigil+ CA400 Control Unit - 3

The concentrator is designed to gather information from detectors and drive local outputs, providing two-waycommunication between the concentrator and the Chubb Vigil control unit.Each concentrator can monitor 8 detectors and has up to 8 outputs which are used to drive local indicatorsor audible warnings, or turn on and off various devices. The system can be programmed so that any detector input can drive any output irrespective of its location.Up to 32 8 way concentrators can be connected to the Chubb Vigil+ control unit, giving a total of 250 inputsand 128 output drives. The data high way...

Open the catalog to page 3

All Chubb catalogs and technical brochures

  1. Dorgard

    2 Pages

  2. Deafgard

    1 Pages

  3. Deafgard

    4 Pages

  4. Smokecloak

    2 Pages

Archived catalogs

  1. Photo ID

    2 Pages

  2. Inova Master

    2 Pages