video corpo

Packaging, Storage and Handling
3Pages

{{requestButtons}}

Catalog excerpts

Packaging, Storage and Handling - 1

2.5 Packaging, Storage and Handling Board Approximate Approximate Number of Board sur- Total approximate thickness weight board weight boards on pallet face size on weight of boards pallet including pallet CETRIS® cement bonded particleboard in basic format (size 3,350 by 1,250 mm) CETRIS® cement bonded particleboards are stored on wooden pallets allowing for forklift handling. The boards are fixed to the pallet by crosswise tying of the boards to the pallet. Lengthwise tying on customer request only. CETRIS® boards are protected against the weather with PE foil wrap. Wrapping the CETRIS® boards into PE foil does not meet requirements for long-term weather protection in the case of open air storage. Storage may cause bending of the upper board as a result of quicker drying of the upper surface. This effect may be eliminated by turning the board upside down. CETRIS® boards should be stored in a roofed dry space to prevent moistening of the boards before installation. The stored pallets with boards of the same size may be stacked up to a max. five layers. CETRIS® boards should only be handled on the pallets, or in the vertical position. Manual transfers should also be performed in a vertical position. CETRIS® cement bonded particleboard IZOCET and POLYCET (size 1,250 by 625 mm) CETRIS® cement bonded particleboard AKUSTIC and AKUSTIC FINISH (size 1,250 by 625 mm) | 8^| 10.0 7.80 100 78.13 810 Insulation fibreboard for IZOCET flooring system (size 1,200 by 810 mm) 20 5.0 5.0 50 48.6 260 Note: The format and the packaging may change in relation to the supplied assortment of the insulation board manufacturer. CETRIS® PDI floorboards (size 1,220 x 610 mm) 34 33.5 24 30 22.32 750

Open the catalog to page 1
Packaging, Storage and Handling - 2

Note: The tolerances are specified pursuant to EN 634-1.

Open the catalog to page 2
Packaging, Storage and Handling - 3

Semi-circular groove and tongueRounded and chamfered edges Dimensions Spacing tolerance of individual drilled holes in the board max. ±5 mm. Surface Finishes The warranty period for colour stability (by colour manufacturer) is 3 years minimum. Colour shades of CETRIS® FINISH (FINISH PROFIL) boards may be selected from the RAL or NCS colour table. It is recommended to consult the fitness of the selected colour shade with the manufacturer. The reverse side of CETRIS® boards with a surface finish is covered with one layer of primer (lacquer) - in standard white or a transparent shade. The...

Open the catalog to page 3

All Cetris catalogs and technical brochures