ULTRADRAIN™ 6200 consists of a high-flow dimpled drainage core, which is then bonded to a layer of non-woven filter fabric. DESCRIPTION ULTRADRAIN™ 6200 consists of a moderate duty polymeric sheet cuspated under heat and pressure to form a high flow dimpled drainage core. The core is then bonded to a layer of non-woven filter fabric. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. Ultradrain 6200 also has a protection sheet bonded to the backside of the cuspated core providing protection for soft membrane barrier systems. APPLICATION ULTRADRAIN™ 6200 is designed for use as a drainage and protection course specially designed for vertical wall LIQUID BooT® applications. BENEFITS ULTRADRAIN™ 6200 is installed directly over the finished Liquid Boot® vapor intrusion barrier, providing superior drainage and protection to the membrane. PACKAGING ULTRADRAIN™ 6200 is available in the following packaging options: • 4 ft. x 50 ft. (1.22 m x 15.24 m) Rolls OUR STANDARDS. YOUR PEACE OF MIND. North America: 847.851.1800 | 800.527.9948 | www.CETCO.com © 2014 CETCO. IMPORTANT: The information contained herein supersedes all previous printed versions, and is believed to be accurate and reliable. For the most up-to-date information, please visit www.CETCO.com. CETCO accepts no responsibility for the results obtained through application of this product. CETCO reserves the right to update information without notice. UPDATED; FEBRUARY 2014 TDS_ULTRADRAIN-6200_AM_EN_201403_V1 A Minerals Technologies Company