TECHNICAL DATA DESCRIPTION GEOVENT™ consists of a three-dimensional vent core that is wrapped in a non-woven, needle-punched filter fabric. GEOVENT End Outlets are available for use in conjunction with GEOVENT active/passive gas venting systems. APPLICATION GEOVENTrM is designed for use in the following application: • An active or passive venting when used with CETCO vapor intrusion mitigation systems. BENEFITS • Installed directly on subgrade eliminating trenching and potential interference or damage to existing underground utilities • Placed in closer proximity to the vapor intrusion barrier allowing for more effective venting of any accumulated gas • Greater opening area per lineal foot of pipe and integral filter fabric allows for higher ventilation efficiency TESTING DATA GEoVENT™ allows for ease of installation directly on the subgrade, eliminating the need for costly and labor-intensive trenching. OUR STANDARDS. YOUR PEACE OF MIND. A Minerals Technologies Company North America: 847.851.1800 | 800.527.9948 | www.CETCO.com © 2014 CETCO. IMPORTANT: The information contained herein supersedes all previous printed versions, and is believed to be accurate and reliable. For the most up-to-date information, please visit www.CETCO.com. CETCO accepts no responsibility for the results obtained through application of this product. CETCO reserves the right to update information without notice. UPDATED; FEBRUARY 2014 TDS_GEQVENT_AM_EN_201403_v1