Catalogs >
CETCO EUROPE >
ENVIROSHEET Building Materials Group ®

ENVIROSHEET Building Materials Group ®
4Pages

Add to favorites

Catalog excerpts

ENVIROSHEET Building Materials Group ® - 1

SHEET MEMBRANE WATERPROOFING SYSTEM ENVIROSHEET Building Materials Group ®

Open the catalog to page 1

ENVIROSHEET Building Materials Group ® - 2

ENVIROSHEET® is a rubberized-asphalt sheet membrane system designed to waterproof vertical and horizontal structural concrete, masonry and wood substrates. Envirosheet's quality construction and adhesion to the substrate provides long term performance and ensures uniform, consistent waterproofing protection. Envirosheet is excellent for waterproofing below grade foundation walls, plaza decks, parking decks, tunnels, interior slabs and earth covered structures. Installation of Envirosheet is fast and easy. Simply position the product into place over a properly prepared and primed substrate....

Open the catalog to page 2

ENVIROSHEET Building Materials Group ® - 3

• FOUNDATION WALLS • INTERIOR SLABS • PLAZA DECKS • BRIDGE DECKS • PARKING DECKS • PLANTERS • TUNNELS • BALCONIES • EARTH COVERED STRUCTURESaaa aa a a aa aa a aa aa Below-grade Concrete Wall Installation APPLICATION INSTRUCTIONS Envirosheet membrane should be applied during dry weather conditions at temperatures above 50°F (10°C) - use Envirosheet LT Membrane when the temperature is 60°F to 25°F (16°C to -4°C). The substrate must be clean, dry and free of surface irregularities. Concrete should be cured a minimum of seven days prior to installation. Lightweight structural concrete should be...

Open the catalog to page 3

ENVIROSHEET Building Materials Group ® - 4

Building Materials Group 1500 West Shure Drive Arlington Heights, IL 60004 USA. (847)392-5800 Fax (847)506-6195 http://www.cetco.com Form No. ENSHT-101 Printed in USA. FEBRUARY 2002 Property Test Method Typical Value (metric) Color Dark Gray-Black Thickness 60 Mils (1.5 mm) Hydrostatic Head Resistance ASTM D 5385 231 ft. (70 m) Tensile Strength, Membrane ASTM D 412 (C) Mod. 300 psi (2,068 kPa) Tensile Strength, Film ASTM D 412 5,000 psi (34,475 kPa) Elongation ASTM D 412 (C) Mod. 300% min. Permeance ASTM E 96 (B) 0.05 perms Low Temperature Flexibility ASTM D 1970 Unaffected at -20°F (-29°C)...

Open the catalog to page 4