TECHNICAL DATA BASEFABRIC™ T-40 NON-WOVEN GEOTEXTILE FABRIC DESCRIPTION BaseFabric™ T-40 is a long lasting, durable, non-woven geotextile manufactured from high quality polypropylene. BaseFabric™ T-40 is a continuous filament, heat-bonded geotextile fabric with superior uniformity that reinforces and separates the membrane from soil particles. BaseFabric™ T-40 is manufactured to meet or exceed the minimum average roll values listed in the table below. BaseFabric™ T-40 serves as the base layer to the Liquid Boot® and Liquid Boot® Plus vapor intrusion mitigation systems. BaseFabric™ T-40 is a needle-punched, non-woven geotextile with superior tensile strength and puncture resistance. Installed directly on the subgrade, BaseFabric™ T-40 provides a uniform substrate for the Liquid Boot® vapor intrusion barrier to be spray-applied to. Product should be installed in accordance with specific installation guide specifications. TESTING DATA PHYSICAL PROPERTIES PROPERTY TEST METHOD Grab Tensile Strength Trapezoid Tear Vertical Water Flow Rate North America: 847.851.1800 | 800.527.9948 | www.CETCO.com © 2014 CETCO. IMPORTANT: The information contained herein supersedes all previous printed versions, and is believed to be accurate and reliable. For the most up-to-date information, please visit www.CETCO.com. CETCO accepts no responsibility for the results obtained through application of this product. CETCO reserves the right to update information without notice. Updated: FEBRUARY 2014