Dear customers, You are holding a catalogue of protective work equipment focused on work at heights, in narrow spaces or above water surfaces. It is just a small part of equipment that exists. Its correct selection and combination depend on the risks associated with the given job. We can propose the right combination of personal protection equipment right on-site and provide the related services at the same time. Gravity affects all of us. Human response time to an unexpected event is approximately 2 seconds. During this time, you can drop 19.6 m by free fall and reach a speed of 71 km/h.

FALL PROTECTION COLLECTIVE FALL PROTECTION We offer designing, installation, maintenance and inspection of fixed fall protection systems. These include systems installed on buildings or structures that serve as anchoring means for maintenance or activities performed at heights. These systems are always designed for a specific situation and are permanent at the installation site. If you are interested, please contact our sales representatives. A technician responsible for the design will arrive on site and work with you to design the best solution for safe work. The systems are certified according...

FALL PROTECTION WHEN YOU NEED FALL PROTECTION In work positions and on access roads located higher than 1.5 m above the surrounding level or next to free depth exceeding 1.5 m. In all other work positions and access roads located at any height above the water or above substances posing a risk of injury or death in case of fall, e.g. by burning, acute poisoning and suffocation. BASICS OF WORKING AT HEIGHTS: The basic components of fall protection are described by the ABC system. Simply put, a system lacking one part does not work. ANCHOR POINT CONNECTING DEVICE A – Anchor point / anchoring equipment...

FALL PROTECTION CALCULATION OF THE FALL DEPTH The fall depth is the distance a person travels by the length of the fall when attached to an attachment point of a restraint system. It is related to the fall factor. Therefore, it is important to choose a combination of means that ensures a sufficient and safe distance from the ground (obstacle). To calculate this distance, it is necessary tokNow the lengths of means used in the extended state. The minimum vertical distance between the anchor point and the obstacle. Length of the connecting device (rope) + fully extended shock absorber + body height...

SETS FOR WORKING AT HEIGHTS Roofs inclined, flat, ladders icludng harness and fall arrester with shock absorber rope length 10 or 15m. USE: » Tower climbing - electro distribution » Work on telecommunication » Work on roofs » Work on steel structures, maintenance Industry, platforms including Harness Basic with front and rear anchor point and shock absorber with rope and oval carabiners. USE: » Access platforms » Work on steel structures, maintenance » Work on roofs

SETS FOR WORKING AT HEIGHTS CERVA SET 3: SCAFOLD 08510017 99 999 standards: Moving on steel structure scafold. Harness and shock absorber with two ropes and sanp hooks openning 50 mm. USE: » Tower climbing - electro distribution » Work on steel structures, maintenance » Scaffolding » Access platforms » Work on telecommunication CERVA SET 4: ASCEND COMFORT 08510018 99 999 standards: Set for work in the high n. 4 for roofs steel structure and ladders. Set including comfort harness LX5 and fall arrester Catcher with rope and carabiner. USE: » Tower climbing - electro distribution » Work on telecommunication...

SETS FOR WORKING AT HEIGHTS Roofers kit flat/Inclined roofs, vertical ladder. Kit including harness and fall arrester on the rope plus carabiner. USE: » Tower climbing - electro distribution » Work on telecommunication » Work on roofs » Work on steel structures, maintenance Fall safe FS151 KIT lifts, cherry pickers, industrial maitenance harness, shock absorber with webbing and carabiners. USE: » Access platforms » Work on steel structures, maintenance » Work on roofs Set for work in th high retracable system 7m, harness, carabiner and anchor sling for vertical and sloping mooving. USE: » Scaffolding...

SETS FOR WORKING AT HEIGHTS Scaffolding, steel structure Incuding : FS2018 AQUILA 5 Harness Size: Universal Weight: 1,31 Kg EN361 FS550-LN-1.5M CHIMANGO 5 shock absorber with two lanyards and snap hooks opening 52 mm FS8205 RUCKSACK STANDAR Capacity: 20 L. USE: » Tower climbing - electro distribution » Work on steel structures, maintenance » Scaffolding » Access platforms » Work on telecommunication FS090 ASTUR WORK POSITIONING BELT 2 side rings for positioning work Waist size adjustment provides perfect fit for the user Easy to attach positioning belt with 1 standard buckle Ergonomically designed,...

IGNITE PROTON WIND 08010030 99 910 XS–S 08010030 99 911 M–2XL 08010030 99 912 2XL–5XL standards: EN 358:1999, EN 361:2002 size: XS/M, M/XXL, XXL–5XL load capacity: 140 kg weight: 2,7 kg, 2,8 kg, 2,9 kg Two point for catching fall and third point for vertical rails systems padding on shoulders and legs quick buckles. Usage firebrigades steel structures, telecomunication, electrodistribution, wind mills. USE: » Rescue operation, special forces » Work on steel structures, maintenance » Access platforms » Work on telecommunication » Tower climbing - electro distribution » Wind mils maintenance »...

IGNITE ION 08010048 99 910 XS–M 08010048 99 911 M–2XL 08010048 99 912 2XL–5XL standards: EN 361:2002 size: XS/M, M/XXL, XXL–5XL load capacity: 140 kg weight: 1,21 kg, 1,26 kg, 1,31 kg Our new all-round safety harness for all classical applications in construction and maintenance has above all one major feature due to simplified adjustment options in the chest and leg area as well as three different sizes: exceptional fit! The buckle by Fidlock in the chest area snaps magnetically and closes almost automatically. The two orange roping-up loops made of fabric are approved for joint use and equipped...