Product Range and Colors

The document details the Ubik Stone Effect Collection by Ceramiche Keope, featuring ceramic tiles in various colors: Anthracite, Grey, Greige, Walnut, and Ivory. The tiles come in multiple sizes, including 120×120 cm (48”×48”), 60×120 cm (24”×48”), 60×60 cm (24”×24”), 30×60 cm (12”×24”), and 9.7×60 cm (3 7/8”×24”). Thickness options are primarily 9 mm and 20 mm, with some products exclusively available in 20 mm thickness.

Surface Finishes and Textures

Available finishes include Structured (R11), Natural (R10), and Crossing 3D, providing different slip resistance and aesthetic effects. The 3D Crossing finish is offered in 9 mm thickness for the 60×120 cm format. The collection also includes decorative elements such as listello up mosaics (50×50 cm and 30×30 cm) and tesserae (4.8×4.8 cm).

Special Elements and Trims

Special pieces and trims are available in both 9 mm and 20 mm thicknesses. These include bullnose/plinths, glued step treads, corner step treads, corner grids, bullnose edge corners, bullnose edge steps, bullnose edge tops, external and internal bullnose edge corners, L kerbs, and L terminals. Sizes vary, with some trims available upon request, especially in 20 mm thickness.

Technical Characteristics and Standards

The tiles comply with EN 14411 and ISO 13006 standards for dry-pressed tiles (Group B1-a) with water absorption ≤ 0.5%. Key technical parameters include:

• Dimensions and Tolerances: Length and width tolerances range from ±0.4 mm to ±2.0 mm depending on size and rectified (RT) finish.
• Flatness and Rectangularity: Flatness tolerance up to ±1.8 mm (RT), rectangularity up to ±2.0 mm (non-RT).
• Thickness: ±0.5 mm or ±5% of nominal thickness.
• Water Absorption: ≤ 0.5% (ISO 10545-3).
• Bending Strength: Minimum 35 N/mm²; varies with thickness (e.g., ≥40 N/mm² for 9 mm thickness).
• Breaking Strength: Minimum 700 N for tiles <7.5 mm thick, ≥1300 N for thicker tiles.
• Abrasion Resistance: Deep abrasion ≤175 mm³ (ISO 10545-6); surface abrasion classified by manufacturer.
• Thermal Shock and Frost Resistance: Compliant with EN ISO 51045-1.
• Chemical Resistance: Resistant to household chemicals and swimming pool salts (minimum class B); manufacturer specifies resistance to acids and alkalis.
• Stain Resistance: Minimum class 3 for polished (GL) tiles; manufacturer classification for unpolished (UGL).

Slip Resistance

Slip resistance is tested according to DIN EN 16165 annexes A, B, and C (formerly DIN 51097, DIN 51130, and Pendulum test). The collection offers:

• R10 and R11 ratings depending on surface finish and thickness.
• Dynamic coefficient of friction (DCOF) values exceeding 0.40 (dry and wet) per B.C.R.A and ANSI A326.3 standards.
• Low slip risk with Pendulum Test Values (PTV) ≥ 36 for dry and wet conditions.

Additional Information

All technical details and certifications are subject to updates by Ceramiche Keope, which reserves the right to modify specifications without notice. For specific certificates or detailed technical data, contact Ceramiche Keope directly or refer to their website.