1. Catalogs
  2. CERAMICA FERRES
  3. Celosia_Palamos_Ceramica_Ferres_Ficha_Tecnica
video corpo

Celosia_Palamos_Ceramica_Ferres_Ficha_Tecnica

Celosia_Palamos_Ceramica_Ferres_Ficha_Tecnica

Celosia_Palamos_Ceramica_Ferres_Ficha_Tecnica

Product catalog summary
Specifications
The document outlines the specifications for ceramic latticework (celosía) produced by Ceràmica Ferrés. The dimensions of the lattice can vary by 2-4mm due to the type of clay or finish, and slight color variations may occur among pieces. The lattice is available in various colors and finishes, with specific dimensions and weights provided for different models (A, B, C).

Procedures
General instructions for the installation of ceramic latticework include creating a layout with a maximum dimension of 320x320 cm and using expansion joints between modules. The lattice can be bonded using Portland cement mortar or polyurethane adhesives. For applications as ventilated or screen walls, stainless steel anchors are recommended.

Standards and Testing
The document references several UNE-EN ISO standards for testing water absorption, frost resistance, chemical resistance, and abrasion resistance. Specific results are provided for different types of terracotta and glazed ceramics.

Recommendations
It is advised not to pre-assemble lattices before receiving them on-site due to potential size variations. In damp areas, waterproof joints are recommended to prevent water infiltration. Attention should be paid during installation to avoid scratches, and acids should be cleaned promptly to prevent damage.

Limitations and Liability
Ceràmica Ferrés disclaims responsibility for improper installation or maintenance. Customers are responsible for ensuring product suitability for specific applications. No guarantees are provided regarding abrasion resistance or material displacement.

Additional Information
The document includes a note on the natural occurrence of crazing in glazed ceramics, which does not affect quality. Variations in dimensions, uniformity, or tone are not considered defects. Samples may not be representative of the final product, and multiple samples are recommended for assessing color variations.
See more

Catalog excerpts

Celosia_Palamos_Ceramica_Ferres_Ficha_Tecnica-1

Palamos Celosfa / Sunbreaks

 Open the catalog to page 1
Celosia_Palamos_Ceramica_Ferres_Ficha_Tecnica-2

Tipología / Typology Celosía / Sunbreaks Palamós Dimensiones / Dimensions Configuración / Configuration Medidas / Size: A 15 x 15 x 5 cm; B 18 x 18 x 7 cm; C 21 x 21 x 7 cm Peso / Weight: A 0,90 kg; B 1,7 kg; C 1,9 kg A Unidades / Units m2 : 45 B Unidades / Units m2 : 31 C Unidades / Units m2 : 23 Material Cerámica / Ceramic Acabados / Finishes Terracota Vidriado / Glaze Esmaltado / Glaze La medida de la celosía puede sufrir una variación de 2-4mm según tipo de arcilla o acabado. Por este motivo se recomienda no realizar ningún montaje previo para insertar la celosías hasta recibirlas en obra....

 Open the catalog to page 2
Celosia_Palamos_Ceramica_Ferres_Ficha_Tecnica-3

ES Información general La colección que presentamos en este catálogo recoge una gran variedad de piezas cerámicas vidriadas para diferentes usos y en diferentes formatos y colores. La base utilizada es una mezcla de arcillas existentes en la zona, hecho que les confiere una resistencia y unas propiedades singulares para el extrusionado y la monococción. La extensa gama de colores se obtiene a partir de las propias arcillas y de óxidos aplicados conjuntamente con un barniz único por su transparencia y fluidez, lo que le otorga a la superficie de las piezas un aspecto y una textura parecidos al...

 Open the catalog to page 3
Celosia_Palamos_Ceramica_Ferres_Ficha_Tecnica-4

General Information The collection presented in this catalog includes a wide variety of glazed ceramic pieces for various uses and in assorted sizes and colors. The base used is a mixture of clays from the area, giving them strength and unique properties for extrusion and single firing. The wide range of colors is derived from the clays themselves and from oxides applied together with a varnish unique for its transparency and smoothness, which gives the surface an appearance and texture similar to glass. The transparency of the surface and the unchanging quality achieved by the colors at a temperature...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.