1. Catalogs
  2. CERAMICA FERRES
  3. Celosia_Curva_Ceramica_Ferres_Ficha_Tecnica
video corpo

Celosia_Curva_Ceramica_Ferres_Ficha_Tecnica

Celosia_Curva_Ceramica_Ferres_Ficha_Tecnica

Celosia_Curva_Ceramica_Ferres_Ficha_Tecnica

Product catalog summary
Specifications
The document outlines the specifications for ceramic latticework, highlighting that dimensions may vary by 2-4mm due to clay type or finish. It is advised not to pre-assemble lattices before they arrive on site. Variations in color and size are expected, and a joint of 6-10 mm is recommended. The ceramic pieces are made from local clays, providing unique properties for extrusion and single firing. The glazed surface resembles glass, offering a warm and bright appearance.

Procedures
General instructions for implementing ceramic latticework include setting out a maximum grid size of 320x320 cm and using expansion joints between modules. Bonding can be done with Portland cement mortar or polyurethane adhesives. For ventilated or screen walls, stainless steel anchors are recommended, and structural specialist advice is essential.

Standards
The document references several UNE-EN ISO standards for water absorption, frost resistance, chemical resistance, and abrasion resistance. Specific values are provided for different types of terracotta and glazed ceramics.

Recommendations
It is recommended to use waterproof joints in damp areas to prevent moisture infiltration. Bright colors are not advised for high-wear areas due to potential scratches. Immediate cleaning of acids and food is necessary to prevent surface damage. Multiple samples should be used to assess color variations before final decisions.

Limitations
Cerámica Ferrés disclaims responsibility for improper installation or maintenance. Customers must ensure product suitability for specific applications. No guarantees are provided for abrasion resistance or material displacement.

Technical Data
Technical specifications include water absorption rates, frost resistance, chemical resistance, and thermal expansion coefficients for various ceramic types. The document also notes that crazing is a natural feature and not a defect.
See more

Catalog excerpts

Celosia_Curva_Ceramica_Ferres_Ficha_Tecnica-1

CERAMICA • GRES Curva Celosfa / Sunbreaks

 Open the catalog to page 1
Celosia_Curva_Ceramica_Ferres_Ficha_Tecnica-2

Tipología / Typology Celosía / Sunbreaks Curva Dimensiones / Dimensions Configuración / Configuration Medidas / Size: 17 x 9 x 10 cm Peso / Weight: 0,60 kg Material Cerámica / Ceramic Acabados / Finishes Terracota Vidriado / Glaze Esmaltado / Glaze La medida de la celosía puede sufrir una variación de 2-4mm según tipo de arcilla o acabado. Por este motivo se recomienda no realizar ningún montaje previo para insertar la celosías hasta recibirlas en obra. The measure of the lattice can undergo a variation of 2-4mm depending on the type of clay or finish. For this reason, it is recommended not to...

 Open the catalog to page 2
Celosia_Curva_Ceramica_Ferres_Ficha_Tecnica-3

ES Información general La colección que presentamos en este catálogo recoge una gran variedad de piezas cerámicas vidriadas para diferentes usos y en diferentes formatos y colores. La base utilizada es una mezcla de arcillas existentes en la zona, hecho que les confiere una resistencia y unas propiedades singulares para el extrusionado y la monococción. La extensa gama de colores se obtiene a partir de las propias arcillas y de óxidos aplicados conjuntamente con un barniz único por su transparencia y fluidez, lo que le otorga a la superficie de las piezas un aspecto y una textura parecidos al...

 Open the catalog to page 3
Celosia_Curva_Ceramica_Ferres_Ficha_Tecnica-4

General Information The collection presented in this catalog includes a wide variety of glazed ceramic pieces for various uses and in assorted sizes and colors. The base used is a mixture of clays from the area, giving them strength and unique properties for extrusion and single firing. The wide range of colors is derived from the clays themselves and from oxides applied together with a varnish unique for its transparency and smoothness, which gives the surface an appearance and texture similar to glass. The transparency of the surface and the unchanging quality achieved by the colors at a temperature...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.