1. Catalogs
  2. CERAMICA FERRES
  3. Celosia_Calella_Ceramica_Ferres_Ficha_Tecnica
video corpo

Celosia_Calella_Ceramica_Ferres_Ficha_Tecnica

Celosia_Calella_Ceramica_Ferres_Ficha_Tecnica

Celosia_Calella_Ceramica_Ferres_Ficha_Tecnica

Product catalog summary
Specifications:
The document outlines the specifications for ceramic latticework (celosía) produced by Ceràmica Ferrés. The dimensions of the lattice are approximately 17.5 x 15 x 6 cm, with a weight of 1.685 kg per unit. Variations in size (2-4mm) may occur due to the type of clay or finish, and slight color variations are possible among pieces.

Materials and Finishes:
The latticework is made from a mixture of local clays, providing unique properties for extrusion and single firing. The glazed surface is achieved through the application of oxides and a transparent varnish, resulting in a glass-like appearance. The document lists various colors available, such as Rojo, Amarillo, Verde, and Azul.

Installation Guidelines:
General instructions recommend a maximum grid size of 320x320 cm for installation. Expansion joints should be used between modules, and connections can be made with Portland cement mortar or polyurethane adhesives. For applications as ventilated or screen walls, stainless steel anchors are recommended.

Technical Standards:
The document references several UNE-EN ISO standards for water absorption, frost resistance, chemical resistance, and abrasion resistance. For example, Terracotta Sunbreaks have a water absorption rate of 10%-13% and comply with frost resistance standards.

Recommendations and Limitations:
It is advised to avoid pre-assembly before receiving the lattices on-site. Glazed surfaces may show wear over time, and bright colors are not recommended for high-use areas. The document emphasizes the importance of cleaning acidic substances promptly to prevent damage.

Liability and Samples:
Ceràmica Ferrés disclaims responsibility for improper installation or maintenance. Customers are responsible for ensuring product suitability. Variations between batches mean samples may not be fully representative, and multiple samples should be used to assess color variations.
See more

Catalog excerpts

Celosia_Calella_Ceramica_Ferres_Ficha_Tecnica-1

CERAMICA • GRES Calella Celosfa / Sunbreaks

 Open the catalog to page 1
Celosia_Calella_Ceramica_Ferres_Ficha_Tecnica-2

Tipología / Typology Celosía / Sunbreaks Calella Dimensiones / Dimensions Configuración / Configuration Medidas / Size: 17,5 x 15 x 6 cm Peso / Weight: 1,685 kg Material Cerámica / Ceramic Acabados / Finishes Terracota Vidriado / Glaze Esmaltado / Glaze La medida de la celosía puede sufrir una variación de 2-4mm según tipo de arcilla o acabado. Por este motivo se recomienda no realizar ningún montaje previo para insertar la celosías hasta recibirlas en obra. The measure of the lattice can undergo a variation of 2-4mm depending on the type of clay or finish. For this reason, it is recommended...

 Open the catalog to page 2
Celosia_Calella_Ceramica_Ferres_Ficha_Tecnica-3

ES Información general La colección que presentamos en este catálogo recoge una gran variedad de piezas cerámicas vidriadas para diferentes usos y en diferentes formatos y colores. La base utilizada es una mezcla de arcillas existentes en la zona, hecho que les confiere una resistencia y unas propiedades singulares para el extrusionado y la monococción. La extensa gama de colores se obtiene a partir de las propias arcillas y de óxidos aplicados conjuntamente con un barniz único por su transparencia y fluidez, lo que le otorga a la superficie de las piezas un aspecto y una textura parecidos al...

 Open the catalog to page 3
Celosia_Calella_Ceramica_Ferres_Ficha_Tecnica-4

General Information The collection presented in this catalog includes a wide variety of glazed ceramic pieces for various uses and in assorted sizes and colors. The base used is a mixture of clays from the area, giving them strength and unique properties for extrusion and single firing. The wide range of colors is derived from the clays themselves and from oxides applied together with a varnish unique for its transparency and smoothness, which gives the surface an appearance and texture similar to glass. The transparency of the surface and the unchanging quality achieved by the colors at a temperature...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.