Formawall® Dimension Series® 3”-T DS-59 Horizontal & Vertical Applications

Product catalog summary

Overview: The Formawall Dimension Series 3”-T DS-59 panels are designed for both horizontal and vertical applications, featuring a unique side joint. These panels are available in a 12” module and can be used as standalone systems or integrated with other Dimension Series panels.

Specifications:

Panel Thickness: 3” for both galvanized and stainless steel.
Panel Module: 12”.
Side Joint: Double tongue and groove.
End Joint: 5/8” Insulated Metal Vertical Joint (IMV).
Core Material: Poured-in-place Polyisocyanurate.
Side Joint Reveal: Standard 2 1/4”, optional from 1 1/4” to 6” in 1/2” increments.

Design Options:

Standard Exterior Face: 22 ga. Embossed, Flat, lengths from 1’-37’ for galvanized and 6’-16’ for stainless steel.
Optional Exterior Face: 20 ga. Smooth, Flat for galvanized and 22 ga. Non-Embossed, Flat for stainless steel.
Standard Interior Liner: 22, 26 ga. Embossed, Planked.
Optional Interior Liner: Various gauges and finishes including embossed and non-embossed options.

Weights:

22/26 GA: 3.50 lbs/sq. ft. for galvanized, 3.81 lbs/sq. ft. for stainless steel.
22/22 GA: 4.00 lbs/sq. ft. for galvanized, 4.37 lbs/sq. ft. for stainless steel.

Notes:

Maximum support spacing and panel length may be limited for medium and dark colors due to thermal stress. Consult CENTRIA for guidance.
For special applications, contact a local CENTRIA Sales Representative.
A metric version of this technical data sheet is available on the CENTRIA website.

Catalog excerpts

Formawall® Dimension Series® 3”-T DS-59 Horizontal & Vertical Applications-1

CENTRIA 3”-T DS-59 Horizontal & Vertical Applications Formawall Dimension Series profile panels offer a unique side joint which allows for horizontal or vertical application. Panels are available in a 12” module which can be integrated as feature bands with 3”-T Dimension Series flat panels as a stand alone profile wall system, or used integrated with other Dimension Series profile panels. A. Maximum support spacing and panel length may be limited for medium and dark colors due to thermal stress, consult CENTRIA. B. For information on special applications, contact your local CENTRIA Sales Representative. C. A metric version of this Tech Data Sheet is available (see www.CENTRIA.com) General Design Options

Open the catalog to page 1

All Centria Architectural Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list