Formawall ® Dimension Series ® 2” DS-60 Horizontal & Vertical Applications

Product catalog summary

Overview: The Formawall® Dimension Series® panels are designed for both horizontal and vertical applications, featuring a unique side joint. These panels are available in a 12-inch module and can be used as standalone systems or integrated with other Dimension Series panels.

Specifications:

Panel Thickness: 2 inches
Panel Module: 12 inches
Side Joint: Double tongue and groove
End Joint: 5/8-inch Insulated Metal Vertical Joint (IMV)
Core Material: Poured-in-place Polyisocyanurate
Side Joint Reveal: 1/2 inch (1/8 inch for vertical application), optional reveals from 1/4 inch to 6 inches in 1/2-inch increments

Material Options:

Galvanized Stainless Steel: Available for both standard and optional exterior and interior faces
Standard Exterior Face: 22 ga. Embossed, Flat
Optional Exterior Face: 22 ga. Smooth, Flat or Non-Embossed, Flat
Standard Interior Liner: 22 ga. Embossed, Flat
Optional Interior Liner: 20 ga. Embossed, Flat

Weights:

22/26 GA: 3.35 lbs/sq. ft.
22/22 GA: 3.85 lbs/sq. ft.

Design Considerations:

Maximum support spacing and panel length may be limited for medium and dark colors due to thermal stress. Consultation with CENTRIA is recommended.
For special applications, contact a local CENTRIA Sales Representative.
A metric version of this technical data sheet is available on the CENTRIA website.

Catalog excerpts

Formawall ® Dimension Series ® 2” DS-60 Horizontal & Vertical Applications-1

CENTRIA 2” DS-60 Horizontal & Vertical Applications Formawall Dimension Series profile panels offer a unique side joint which allows for horizontal or vertical application. Panels are available in a 12” module which can be integrated as feature bands with Dimension Series flat panels in 2” thickness or as a stand alone profile wall system, or used integrated with other Dimension Series profile panels. A. Maximum support spacing and panel length may be limited for medium and dark colors due to thermal stress, consult CENTRIA. B. For information on special applications, contact your local CENTRIA Sales Representative. C. A metric version of this Tech Data Sheet is available (see www.CENTRIA.com) General Design Options

Open the catalog to page 1

All Centria Architectural Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list