MidiBlock
1 / 2Pages

With the ReadyBlock > ή range of Dense and Lightweight AggregateBlocks from CEMEX, you are assured to find the building solution you need. Our blocks can be used with confidence in a wide variety of internal and external applications. Our quality assured manufacture ensures that ReadyBlock > CEMEX READYBLOCK > TO BS EN 771Ζ3:2003 Aggregate Concrete Masonry Units Category 1 (dense and light-weight aggregates)ђ > CATEGORY : AGGREGATE CONCRETE MASONRY UNIT units are of a consistentand superior quality to meet the requirements of all European and British standards. DIMENSIONAL TOLERANCES : Category D1 (+3mm, -5mm)FlatnessNo Performance DeterminedPlane ParallelismNo Performance Determined COMPRESSIVE STRENGTH : Mean 7.3 N/mm > 2 , 10.4 N/mm > 2 , 17.5 N/mm > 2 , > Other strengths available on application MOISTURE MOVEMENT COEFFICIENT : = < 0.5 mm/m BOND STRENGTH : Fixed Value, 0.15N/mm > 2 REACTION TO FIRE : Class A1 WATER ABSORPTION : No Performance Determined WATER VAPOUR PERMEABILITY(EN 1745) : 5/15 ε GROSS DRY DENSITY : 1960 kg/m > 3 NET DRY DENSITY : 1960 kg/m > 3 Length Height Width THERMAL CONDUCTIVITY : Int, 1.29 W/mKExt, 1.38 W/mK 290215140 DURABILITY AGAINST FREEZE-THAW : No Performance Determined DANGEROUS SUBSTANCES : Information on dangerous substances will only be given when and where required and in the appropriate form. Block Weights (kg)* 140 Dry3% Moisture Content 17.117.6 > *These figures are a national average and variations may occur geographically,please contact your nearest Sales Office for more precise block weights. ?Have versatility to be used in a wide variety of internal and external applications?Allows use above and below the ground, where strength and durability are prime considerations ?Typically used in cavity or solid wall constructions, they are also ideal for use in internal load bearingwalls and ReadyFloor > Beam and Block Floor system?Have excellent sound insulation and air permeability properties ?Provide an excellent key for secondary finishes and fixings ?Inherent thermal mass acts as a heat store ?Meets the requirements of one-man handling?Ideally suited for constructing corners and to maintain uniformly spaced perpendicular joints ReadyBlock > ή Sales Office:North:01236 822461 South:01298 22244 ReadyFloor > Beam andBlock Flooring System: Tel:01179 373740 >

Blocks are normally delivered to site in banded packs oncrane-offload road vehicles. Where requested packs can be delivered shrink-wrapped and/or palletised to aid subsequent site movement activities. All packaging should be disposed of carefully in accordance with local environmental requirements.If possible, delivered blocks should be stacked in plannedlocations on the site. This reduces the double-handling of the blocks.Packs should be stacked carefully onto a prepared, clean,firm area to minimise soiling and damage. They should also be protected from inclement weather and passing...